| Series | CUWF24_JT-3WR3 |
| Model | CUWF2415JT-3WR3 |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Current (full load / | 165/8 typ, 169/15 max |
| no-load) | mA (Nominal input voltage) |
| Reflected Ripple Current | 30 |
| Surge Voltage (1sec. max.) | -0.7–50 |
| Start-up Voltage | 6 VDC |
| Input Under-voltage Protection | 4.5 typ, 3.5 min |
| Start-up Time | 10 ms typ, 150 ms max (Nominal input voltage & constant resistance load) |
| Input Filter | Pi filter |
| Hot Plug | Unavailable |
| Voltage Accuracy ① | ±1 typ, ±2 max (5%-100% load) |
| Linear Regulation | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Load Regulation | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 25% load step change, nominal input voltage: 300 µs typ, 500 µs max; 25% load step change, 5V output: ±4 µs typ, ±8 µs max |
| Transient Response Deviation | %; input voltage range Others: ±3% typ, ±5% max |
| Temperature Coefficient | Full load: ±0.03%/℃; nominal input voltage: %/℃ (20MHz bandwidth) |
| Ripple & Noise ② | 60mVp-p typ, 100mVp-p max; 5%-100% load: mVp-p |
| Over-voltage Protection | 110–160 %Vo |
| Over-current Protection | 110–300 %Io (Input voltage range) |
| Short-circuit Protection | Continuous, self-recovery |
| Isolation (Input–Output) | VAC (Electric Strength Test for 1 minute) |
| Isolation | 3000 VAC |
| Insulation Resistance | Input-output resistance at 500VDC: 1000 MΩ |
| Isolation Capacitance | Input-output capacitance at 100kHz/0.1V: 500 pF; Clearance: 4.2 pF |
| Reinforced Isolation | mm; Creepage: 4.5 mm |
| Operating Temperature | -40 to +105℃ (See Fig. 1) |
| Storage Temperature | -55–+125℃ |
| Storage Humidity | Non-condensing: 5–95 %RH; Soldering spot is 1.5mm away from case for 10: %RH; 300 %RH |
| Case Material | Black epoxy resin; flame-retardant and heat-resistant(UL94V-0); CUWF24_JT-3WR3: 43.68 x 23.0 x 10.00 mm |
| Dimensions | CUWF24_JYT-3WR3: 43.68 x 25.0 x 10.64 mm; CUWF24_JT-3WR3: 7.5g (Typ.) |
| Weight | CUWF24_JYT-3WR3: 10.4g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | ; |
| EMC Immunity | ESD: ISO10605 Contact ±6kV (perf. Criteria B); RS: ISO11452-2 150V/m (see Fig.3 for recommended circuit) (perf. Criteria A) |