| Series | PVA120-26BxxR2 |
| Model | PVA120-26B24R2 |
| Brand | MORNSUN |
| Input Voltage Range | 1400 |
| Input Voltage Range (AC) | VAC |
| Input Voltage Range (DC) | 120–1840 VDC |
| Input Voltage Frequency | 47–63 Hz; 127VAC/220VAC: 2.5 Hz |
| Input Current | 660VAC: 0.8A max; 1140VAC: 0.5A max; 660VAC: 20A |
| Inrush Current | 25A @1140VAC (Cold start) |
| Start-up Delay Time | 2 s; 1500VAC/4A, required (brand: Adler models: |
| Required External Input Fuse | A851400Q00 base models: BH300) |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | ±1% (All load range) |
| Line Regulation | ±1% (Rated load) |
| Load Regulation | ±1% (0% - 100% load) |
| Ripple & Noise | (peak-to-peak value): 200mV max; 220VAC: 2mV typ, 3mV max (20MHz bandwidth) |
| Stand-by Power Consumption | 660VAC: 3W typ, 4W max; 1140VAC: 4W typ, 5W max |
| Temperature Coefficient | ±0.02%/℃ |
| Short Circuit Protection | Hiccup, continuous, self-recovery |
| Over-current Protection | ≥110%Io, hiccup, self-recovery; 24V: ≤35V |
| Over-voltage Protection | 28V: ≤40V Output voltage clamp or hiccup; 35V: ≤45V |
| Minimum Load | 0% |
| Hold-up Time | 50 ms @Full load 660VAC |
| Isolation (Input–Output) | 5000 VAC |
| Isolation (Input–⏚) | 4000 VAC (PE Electric Strength Test for 1min., leakage current ≤3mA) |
| Isolation (Output–⏚) | 1500 VAC (PE) |
| Insulation Resistance | Input - PE Test voltage: 500VDC: 100 MΩ; Output - PE: MΩ |
| Operating Temperature | -25 to +70℃ |
| Storage Temperature | -40–+85℃ |
| Storage Humidity | Non-condensing: 95 %RH; Operating temperature -25℃ to -10℃: 2.6 %/℃; derating +50℃ to +70℃: 2 %RH |
| Output Power Derating | 85 - 100VAC: 2; Input voltage derating: %/VAC; 100 - 127VAC: 0.74; Altitude derating 2000 - 5000m: 10 %/Km |
| MTBF | ≥300,000 h (MIL-HDBK-217F@25℃) |
| Dimensions | 199.00 x 110.00 x 55.00mm |
| Weight | 830g (Typ.) |
| Cooling Method | Free air convection |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±6KV/Air ±8KV (Perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (Perf. Criteria A); EFT: IEC/EN61000-4-4 ±4KV (Perf. Criteria A); Surge: IEC/EN61000-4-5 Line to line ±2KV/ line to PE ±4KV (Perf. Criteria A); CS: IEC/EN61000-4-6 10Vr.m.s (Perf. Criteria A); PFMF: IEC/EN61000-4-8 30A/m (Perf. Criteria A) |