| Series | URB_YMD-40W(H)R3 |
| Model | URB2424YMD-40WR3 |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Current (full load / | 3.3V output: 1545/4 typ, 1580/12 max mA; 24VDC nominal input series,: mA; nominal input voltage: mA; Others: 1852/4 typ, 1894/12 max mA |
| no-load) | 3.3V output: 772/7 typ, 790/15 max; Others: 926/7 typ, 947/15 max (48VDC nominal input series,; nominal input voltage) |
| Reflected Ripple Current | nominal input series: 100; 24VDC nominal input series: -0.7–50 |
| Surge Voltage (1sec. max.) | 48VDC nominal input series: -0.7–100; 24VDC nominal input series: 9 |
| Start-up Voltage | VDC; 48VDC nominal input series: 18 VDC; 24VDC nominal input series: 7.5 VDC typ, 5.5 VDC min |
| Input under-voltage protection | 15 typ, 12 min @48VDC nominal input series |
| Start-up Time | 30 ms typ, 100 ms max (Nominal input voltage & constant resistance load) |
| Input Filter | Capacitance filter |
| Hot Plug | Unavailable 3.5-12VDC); Module on: Ctrl pin open or pulled high (TTL 3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 6mA typ, 12mA max |
| Voltage Accuracy ① | ±1 typ, ±3 max (5%-100% load) |
| Linear Regulation | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Load Regulation ② | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 250 µs typ, 500 µs max (25% load step change, nominal input voltage) |
| Transient Response Deviation | ±5% typ, ±8% max (25% load step change, input voltage range) |
| Temperature Coefficient | Full load: ±0.03%/℃; nominal input voltage: %/℃ (20MHz bandwidth) |
| Ripple & Noise ③ | 100 mV p-p typ, 150 mV p-p max (5%-100% load) |
| Trim | 90–110 %Vo (Input voltage range) |
| Over-temperature Protection | 125℃ (Max. Case Temperature) |
| Over-voltage Protection | 110–160 %Vo |
| Over-current Protection | 110–200 %Io (Input voltage range) |
| Short circuit Protection | Hiccup, continuous, self-recovery |
| Isolation (Input–Output) | VDC (Electric Strength Test for 1 minute with) |
| Isolation | 1500 VDC |
| Insulation Resistance | Input-output resistance at 500VDC: 1000 MΩ; Input-output capacitance 24VDC input series: 10 MΩ |
| Isolation Capacitance | nF; at 100kHz/0.1V 48VDC input series: 2.2 nF |
| Operating Temperature | -40–+105℃ (See Fig. 1) |
| Max. Case Temperature | 110℃ (Rated output load) |
| Storage Temperature | -55–+125℃ |
| Storage Humidity | 5–95 %RH (Non-condensing) |
| Case Material | Aluminum alloy |
| Without heat | sink: 25.40 × 25.40 × 11.70 mm |
| With heat sink | 25.40 × 25.40 × 16.20 mm |
| With heat | sink: 23.4g (Typ.) |
| Cooling method | Free air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS B (see Fig.3-② for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig.3-② for recommended circuit) |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±6kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.3-① for recommended circuit) (perf. Criteria A); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.3-①for recommended circuit) (perf. Criteria A); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |