| Series | VCB48_SBO-40WR3(-N) |
| Model | VCB4824SBO-40WR3 |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Current (full load / no-load) | 3.3V Output: 662/10 typ, 680/20 max mA; 5V Output: 947/10 typ, 980/20 max mA; Nominal input voltage 12V Output: 936/10 typ, 958/20 max mA; 24V Output: 948/10 typ, 970/20 max mA; 28V Output: 948/10 typ, 970/20 max mA |
| Reflected Ripple Current | 30 |
| Surge Voltage (1sec. max.) | -0.7–80 |
| Start-up Voltage | 36 VDC |
| Input Under-voltage Protection | 29 typ, 26 min |
| Start-up Time | 100 ms (Nominal input voltage & constant resistance load) |
| Input Filter | C typ, filter max |
| Hot Plug | Unavailable; VCB48xxSBO-40WR3: Ctrl pin open or pulled high (TTL 4.5-12VDC); VCB48xxSBO-40WR3-N: Ctrl pin pulled low to GND (0-1.2VDC) (Module on) |
| Ctrl | VCB48xxSBO-40WR3-N: Ctrl pin open or pulled high (TTL 4.5-12VDC); VCB48xxSBO-40WR3: Ctrl pin pulled low to GND (0-1.2VDC); Input current when off: 3mA typ, 10mA max (Module off) |
| Output Voltage Accuracy | ±1 typ, ±3 max (5%-100% load) (Input voltage variation from low to high at) |
| Linear Regulation | ±0.2 %Vo typ, ±0.5 %Vo max; full load: %Vo |
| Load Regulation ① | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 25% load step change, Nominal input voltage: 200 µs typ, 500 µs max; 25% load step change, Nominal 3.3V Output: ±5 µs typ, ±10 µs max |
| Transient Response Deviation | %Vo; input voltage Other Output: ±5 %Vo typ, ±8 %Vo max |
| Temperature Coefficient | ±0.03%/ ℃ (Full load) |
| Ripple & Noise ② | 100mVp-p typ, 200mVp-p max (5%-100% load) (20MHz bandwidth) |
| Trim | 90–110 |
| Sense | 105 %Vo |
| Over-voltage Protection | 110–160 %Vo |
| Over-current Protection | 110–190 %Io (Input voltage range) |
| Over-temperature protection | 130℃ |
| Short-circuit Protection | Continuous, self-recovery |
| Isolation Voltage | Input-output Electric Strength Test for 1 minute with a: VDC; 2250 VDC; leakage current of 1mA max.: VDC |
| Insulation Resistance | Input-output resistance at 500VDC: 1000 M Ω |
| Isolation Capacitance | 1000 pF (Input-output capacitance at 100KHz/0.1V) |
| Operating Temperature | -40 to +85℃ (See Fig1.1) |
| Storage Temperature | -55–+125℃ |
| Storage Humidity | Non-condensing: 5–95 %RH; Soldering spot is 1.5mm away from case for 10: %RH |
| Dimensions | 33.02 × 22.86 x8.10mm |
| Weight | 9.5g(Typ.) |
| Cooling method | Natural convection or forced air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS B (see Fig.3-○ 1 ); RE: CISPR32/EN55032 CLASS B (see Fig.3-○ 1 ) |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±4KV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (with additional circuit) (perf. Criteria B); EFT: IEC/EN61000-4-4 ±2KV (see Fig.3-○ 2 for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2KV (see Fig.3-○ 2 for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria B) |