| Series | PV40-29BxxR3 |
| Model | PV40-29B24R3 |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Voltage Range | 250–1500 VDC |
| Input Current | 800VDC: 0.08A max; 800VDC: 60A |
| Inrush Current | 1500VDC: 90A; 12V/24V/28V: 140–240 A; 48V: 130–240 A (Under-voltage protection start) |
| Under-voltage Protection | VDC; Under-voltage protection release: 180–250 VDC; Hysteresis voltage typical value: 50 VDC |
| Input Reverse Polarity Protection | Available |
| External Input Fuse Required | 4A/1500VDC–(CCN:JFGA/JFGA7), required |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | ±1 typ, ±2 max (All load range) |
| Line Regulation | ±0.5% (Rated load) |
| Load Regulation | ±0.5% @800VDC |
| Ripple & Noise | 150mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Temperature Coefficient | ±0.02%/℃ |
| Short Circuit Protection | Hiccup, continuous, self-recovery |
| Over-current Protection | ≥110%Io, typ, self-recovery max; 12V: ≤20VDC; 24V: ≤30VDC |
| Over-voltage Protection | Output voltage clamp or hiccup; 28V: ≤35VDC; 48V: ≤60VDC |
| Minimum Load | 0% |
| Start-up Delay Time | 0.5 s typ, 1.0 s max @250 - 1500VDC |
| Hold-up Time | 10 ms @Room temperature, full load 800VDC input |
| Isolation (Input–Output) | 4000 VAC (Electric Strength Test for 1min., leakage current <3mA) |
| Operating Temperature | -40 to +85℃ |
| Storage Temperature | -40–+85℃ |
| Storage Humidity | 95 %RH; Wave-soldering: 260 ± 5℃; typ, time: 5 - 10s max %RH |
| Soldering Temperature | Manual-welding: 360 ± 10℃; typ, time: 3 - 5s max %/℃; -40℃ to -25℃ 250 - 300VDC: 2.67 %/℃; +55℃ to +70℃: 2.00 %/℃ |
| Power Derating | +70℃ to +85℃: 3.33; 250VDC - 300VDC: 0.8 %/VDC; 2000m - 5000m: 6.7 %/Km |
| Switching Frequency | 65kHz |
| Altitude | 5000 m; Design refer to UL1741, EN62109-1, BS |
| Safety Standard | No.107.1-16 typ; CSA-C22.2 min |
| MTBF | ≥ 300,000 h (MIL-HDBK-217F@25℃) |
| Case Material | Black flame-retardant and heat-resistant plastic (UL94V-0); Horizontal package: 109.00 x 58.50 x 30.00 mm |
| Dimensions | A5 chassis mounting: 135.00 x 70.00 x 38.50 mm; A6 DIN-Rail mounting: 137.00 x 70.00 x 44.00 mm; Horizontal package: 270g (Typ.) |
| Weight | A5 chassis mounting: 350g (Typ.); A6 DIN-Rail mounting: 420g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS A (See Fig. 2 for recommended circuit); RE: CISPR32/EN55032 CLASS A (See Fig. 2 for recommended circuit) |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±6KV/Air ±8KV (Perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (Perf. Criteria A); EFT: Perf. Criteria A; Surge: Perf. Criteria A; CS: IEC/EN61000-4-6 10Vr.m.s (Perf. Criteria A) |