| Series | URB_YMD-20WR3 |
| Model | URB2424YMD-20WR3/A2S/A4S |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Current (full load / | 3.3V output: 782/30 typ, 800/50 max; 5V output: 926/35 typ, 947/55 max; 24VDC nominal input series, 6V output: 936/50 typ, 958/70 max; 12V output: 926/6 typ, 947/15 max; 15V output: 916/6 typ, 937/15 max (nominal input voltage) |
| no-load) | 24V output: 916/10 typ, 937/20 max mA; 3.3V output: 391/15 typ, 400/30 max mA; 5V output: 463/20 typ, 474/30 max mA; 48VDC nominal input series,: mA; nominal input voltage 12V output: 458/3 typ, 469/15 max mA; 15V output: 458/3 typ, 469/15 max mA; 24V output: 458/4 typ, 469/15 max mA |
| Reflected Ripple Current | Nominal input series: 30; 24VDC nominal input series: -0.7–50 |
| Surge Voltage (1sec. max.) | 48VDC nominal input series: -0.7–100; 24VDC nominal input series: 9 |
| Start-up Voltage | VDC; 48VDC nominal input series: 18 VDC; 24VDC nominal input series: 6.5 VDC typ, 5.5 VDC min |
| Under-voltage Protection | 15.5 typ, 12 min @48VDC nominal input series |
| Start-up Time | 10 ms (Nominal input voltage & constant resistance load) |
| Input Filter | Pi filter |
| Hot Plug | Unavailable 3.5-12VDC); Module on: Ctrl pin open or pulled high (TTL 3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 2mA typ, 7mA max |
| Output Voltage Accuracy | ±1 typ, ±3 max (0%-100% load) |
| Linear Regulation | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Load Regulation | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 300 µs typ, 500 µs max; 25% load step change,: µs; 3.3V/ 5V/ 6V output: ±5 µs typ, ±8 µs max |
| Transient Response Deviation | nominal input voltage: %; Others: ±3% typ, ±5% max |
| Temperature Coefficient | ±0.03%/℃ (Full load) |
| Ripple & Noise ① | 50 mV p-p typ, 100 mV p-p max (5%-100% load) (20MHz bandwidth) |
| Trim | 90–110 %Vo |
| Over-voltage Protection | 110–160 %Vo (Input voltage range) |
| Over-current Protection | 110–190 %Io |
| Short-circuit Protection | Hiccup, continuous, self-recovery |
| Isolation (Input–Output) | VDC (Electric Strength Test for 1 minute with) |
| Isolation | 1500 VDC |
| Insulation Resistance | Input-output resistance at 500VDC: 1000 MΩ |
| Isolation Capacitance | Input-output capacitance at 100kHz/0.1V: 2000 pF; 3.3V/ 5V /6V output: -40–+95 pF |
| Operating Temperature | See Fig. 1: ℃; Others: -40 to +105℃ |
| Storage Temperature | -55–+125℃ |
| Storage Humidity | 5–95 %RH (Non-condensing) |
| Case Material | Aluminum alloy; Horizontal package (without heat sink): 25.40 × 25.40 × 11.70 mm; Horizontal package (with heat sink): 25.40 × 25.40 × 16.20 mm; A2S wiring package (without heat sink): 76.00 × 31.50 × 21.20 mm |
| Dimensions | A2S wiring package (with heat sink): 76.00 × 31.50 × 25.20 mm; A4S Din-rail package (without heat sink): 76.00 × 31.50 × 25.80 mm; A4S Din-rail package (with heat sink): 76.00 × 31.50 × 29.80 mm; Horizontal package/A2S wiring; without heat sink: 15.0g/38.0g/58.0g(Typ.); package/A4S Din-rail package |
| Weight | Horizontal package/A2S wiring; with heat sink: 20.0g/40.0g/60.0g(Typ.); package/A4S Din-rail package |
| Cooling method | Free air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS B (see Fig.3-② for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig.3-② for recommended circuit) |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±6kV, Air ±8kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.3-① for recommended circuit) (perf. Criteria A); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.3-①for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |