| Series | URF48_QB-75W(F/H)R3(A5)(A6) |
| Model | URF4824QB-75W(F/H)R3 |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Current (full load/no-load) | 1698/50 typ, 1756/80 max mA; Nominal input voltage: mA |
| Reflected Ripple Current | 30 |
| Surge Voltage (1sec. max.) | -0.7–90 VDC |
| Start-up Voltage | 18; 5VDC, 15VDC output: 16.5 typ, 16 min |
| Input Under-voltage Protection | 15.5 typ, 15 min (Others) |
| Input Filter | Pi filter |
| Hot Plug | Unavailable (3.5-12VDC); Module on: Ctrl pin open or pulled high TTL (3.5-12VDC) |
| Ctrl ① | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 2mA typ, 10mA max |
| Output Voltage Accuracy | ±1 typ, ±3 max (0%-100% load) |
| Linear Regulation | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Load Regulation | ±0.5 typ, ±0.75 max (0%-100% load) |
| Transient Recovery Time | 25% load step change: 200 µs typ, 500 µs max; 5VDC output: ±3 µs typ, ±7.5 µs max |
| Transient Response Deviation | 25% load step change: %; Others: ±3% typ, ±5% max |
| Temperature Coefficient | Full load: ±0.03%/℃; 12VDC, 15VDC output: 100 %/℃ typ, 200 %/℃ max |
| Ripple & Noise ① | mVp-p; Others: 150mVp-p typ, 250mVp-p max (20MHz bandwidth) |
| Trim ② | 95–110 %Vo |
| Sense ② | 105 |
| Over-temperature Protection | 115℃ typ, 120℃ max (Max. Case Temperature) |
| Output Over-voltage Protection | 110–160 %Vo |
| Output Over-current Protection | 110–190 %Io (Input voltage range) |
| Short-circuit Protection | Hiccup, continuous, self-recovery |
| Isolation Voltage | Input-output: 2250 VDC; Electric Strength Test for 1: VDC; minute with a leakage Input-case: 1500 VDC; current of 5mA max: VDC; Output-case: 500 VDC |
| Insulation Resistance | Input-output insulation Voltage 500VDC: 100 MΩ |
| Isolation Capacitance | 2200 pF (Input-output capacitance at 100KHz/0.1V) |
| Operating Temperature | -40 to +85℃ |
| Storage Temperature | -55–+125℃ |
| Storage Humidity | 5–95 %RH (Non-condensing) |
| Case Material | Aluminum alloy case, black plastic bottom, flame-retardant and heat-resistant (UL94 V-0); URF48xxQB-75WR3: 61.8 × 40.2 × 12.7 mm; URF48xxQB-75WFR3: 62.0 × 56.0 × 14.6 mm; URF48xxQB-75WHR3: 61.8 × 40.2 × 27.7 mm |
| Dimension | URF48xxQB-75WR3A5: 135.00 x 70.00 x 22.6mm; URF48xxQB-75WR3A6: 137.00 x 70.00 x 28.10mm; URF48xxQB-75WHR3A5: 135.00 x 70.00 x 36.20mm; URF48xxQB-75WHR3A6: 137.00 x 70.00 x 37.20mm; URF48xxQB-75WR3: 90.0g(Typ.); URF48xxQB-75WFR3: 110.0g(Typ.); URF48xxQB-75WHR3: 121.0g(Typ.) |
| Weight | URF48xxQB-75WR3A5: 166.0g(Typ.); URF48xxQB-75WR3A6: 236.0g (Typ.); URF48xxQB-75WHR3A5: 197.0g(Typ.); URF48xxQB-75WHR3A6: 267.0g (Typ.) |
| Cooling Method | Free air convection (20LFM) |
| EMC Emissions | CE: CISPR32/EN55032 CLASS A and CLASS B (see Fig. 3 for recommended (circuit)); RE: CISPR32/EN55032 CLASS A and CLASS B (see Fig. 3 for recommended (circuit)) |
| EMC Immunity | ESD: IEC/EN61000-4-2, EN50121-3-2 Contact ±6KV Air ±8KV (perf.Criteria B); RS: IEC/EN61000-4-3, EN50121-3-2 10V/m (perf.Criteria A); EFT: IEC/EN61000-4-4, EN50121-3-2 ±2KV(see Fig. 2 for recommended circuit) (perf.Criteria A); Surge: EN50121-3-2 impedance 42Ω (perf.Criteria B); CS: IEC/EN61000-4-6, EN50121-3-2 10 Vr.m.s (perf.Criteria A) |