| Series | HO1-PN202-0.5C |
| Model | HO1-PN202-0.5C |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Reflected Ripple Current ① | 250mA |
| Surge Voltage (1sec. max.) | 18 VDC |
| Input Filter Type | Capacitance filter |
| Hot Plug | Unavailable; Ctrl1, Ctrl2 pin open or pulled low to GND; (0-1.2VDC) (Module on) |
| Ctrl1, Ctrl2 ② | Ctrl1, Ctrl2 pin pulled high (3-12VDC); Input current when off: 25mA typ, 40mA max (Module off) |
| Input Reverse Polarity | -36–0 VDC (The voltage between Vin and GND) |
| Adjust-point Tolerance | ±1 typ, ±2 max (Output voltage guaranteed range, see Fig.4) |
| Reference Voltage Accuracy | ±1% typ, ±2% max (0%-100% load) |
| Linear Regulation | ±0.01 typ, ±0.03 max (Input voltage range, nominal output voltage, full load) |
| Load Regulation | Nominal input voltage, nominal output voltage, 1: ±0.03% typ, ±0.05% max; Nominal input voltage, nominal output voltage, full load, after: % (0%-100% load) |
| Time Coefficient | ±0.001 %/Hr typ, ±0.003 %/Hr max; warming up for 30 minutes: %/Hr |
| Temperature Coefficient | ±0.001 %/℃ typ, ±0.003 %/℃ max (Nominal input voltage, nominal output voltage, full load) |
| Ripple & Noise ① | 50 mV p-p (nominal input voltage, 0%-100% load) (20MHz bandwidth) |
| Over-current Protection | 110–180 %Io; Constant current mode, continuous, |
| Short-circuit Protection | Input voltage range: self-recovery product; 0-5V linear adjustment, set the product |
| Vadj1, Vadj2 (Output Voltage | output voltage by setting the voltage of |
| Adjustment Function) | Vadj pin |
| Operating Temperature | -40 to +105℃ (See Fig. 1) |
| Storage Temperature | -40–+105℃ |
| Storage Humidity | 5–85 %RH (Non-condensing) |
| Case Material | Aluminum alloy |
| Dimensions | 45.00 x 35.00 x 12.50 mm |
| Weight | 33g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS B (see Fig.5-① for recommended circuit); RE: CISPR32/EN55032 CLASS B (without extra components) |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±4kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria B); EFT: IEC/EN61000-4-4 100kHz ±2kV (see Fig.5-② for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.5-② for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria B) |