| Series | VRF3D_FB-600WR3 |
| Model | VRF3D24FB-600WR3 |
| Type | DC/DC Converters |
| Brand | MORNSUN |
| Input Current | 14VDC output voltage, full load: 2364mA typ, 2445mA max; Nominal 270VDC input 24/48VDC output voltage, full load: 2339mA typ, 2411mA max; 28VDC output voltage, full load: 2339mA typ, 2419mA max |
| Reflected Ripple Current | 500 typ, 800 max @Nominal 270VDC input |
| Input Impulse Voltage (1sec.max.) | -0.7–500 VDC |
| Start-up Voltage | 180 |
| Start-up Current | 3500mA max (Nominal 270V input voltage, full load) |
| Start-up Time | 100 ms typ, 300 ms max (Nominal input voltage & constant resistance load) |
| Input Filter | Pi filter |
| Hot Plug | Not available |
| No-load Power Consumption | 16W typ, 20W max (Nominal input voltage & constant resistance load) |
| Static Input Power | CTRL connects to TTL high, and DC-DC is off: 5 (0-0.8VDC) typ, 8 (0-0.8VDC) max; Module turn-on: Ctrl pin suspension or TTL low (0-0.8VDC) |
| Ctrl ① | Ctrl pin open or pulled high (TTL; Module turn-off: (TTL; 4.0-5.0VDC) (TTL |
| Input Under-voltage Protection | 170 VDC typ, 160 VDC min |
| Input Over-voltage Protection | 448 %Vo typ, 455 %Vo max |
| Output Current Range | 0–100 %Io |
| Output Voltage Accuracy | ±1 typ, ±2 max (Normal temperature, Rated output voltage) (0% - 100% load) |
| Linear Regulation | ±0.5% typ, ±1% max @Input voltage ≥200VDC |
| Load Regulation | ±0.4 typ, ±1 max (5% - 100% load) |
| Transient Recovery Time | 200 µs typ, 500 µs max; 25% load step change, nominal input voltage: µs |
| Transient Response Deviation ③ | ±2% typ, ±5% max |
| Temperature Coefficient | Full load: ±0.03%/℃; 14VDC output: 250 %/℃ typ, 300 %/℃ max; Input voltage range, 0% - 100%: %/℃ |
| Ripple & Noise ① | 24/28VDC output: 150mVp-p typ, 400mVp-p max; 48VDC output: 300 typ, 500 max; Nominal input voltage, single: ±3 %Io typ, ±10 %Io max (load; Current unbalance) |
| Parallel Current Sharing | degree: pcs; unit load > 50%Io, < 100%Io: pcs; Parallel number: 4 pcs max |
| Trim | 70–110 %Vo (See figure 2) |
| Sense | 110 (Input voltage range) |
| Over-voltage Protection ② | Input voltage range, output power range: 110–140 A; 14VDC output: 47–56 A; 24VDC output: 27.5–32.5 A |
| Over-current Protection | 28VDC output: 24–28; 48VDC output: 13.5–16.5 (Input voltage range) |
| Short Circuit Protection | Hiccup, continuous, self-recover (Input voltage range) |
| Over-temperature Protection | 95 to 115℃ (Product surface max. temperature) |
| Isolation Voltage | Input-output, the test time is 1 minute and the leakage current is: VAC; 3000 VAC; less than 20mA: VAC; Input-housing, the test time is 1 minute and the leakage current is: VAC; 2500 VAC; less than 20mA: VAC; Output-housing, the test time is 1 minute and the leakage current: VAC; 500 VAC; is less than 20mA: VAC |
| Insulation Resistance | Input-output resistance at 500VDC: 100 MΩ |
| Isolation Capacitance | 2200 pF (Input-output capacitance at 100KHz/0.1V) |
| Operating Temperature | -40 to +100℃ (See fig. 1) |
| Storage Temperature | -55–+125℃ |
| Storage Humidity | 5–95 %RH (Non-condensing) |
| Housing Material | Black flame retardant and heat resistant plastic (UL94 V-0), aluminum alloy |
| Dimensions | 116.80 × 61.00 × 12.90 mm |
| Weight | 220.0g (Typ.) |
| Cooling Method | Natural convection or forced air convection |
| EMC Emissions | ; RE: CISPR32/EN55032 CLASS A (see Fig.8② for recommended circuit) |
| EMC Immunity | ESD: IEC61000-4-2 Contact ±6kV/Air ±8kV (see Fig.8① for recommended circuit) (perf. Criteria A); RS: IEC61000-4-3 10V/m (see Fig.8② for recommended circuit) (perf. Criteria A); EFT: IEC61000-4-4 ±2KV (5KHz,100KHz)(see Fig.8① for recommended circuit) (perf. Criteria A); Surge: IEC61000-4-5 line to line ±2kV/line to ground ±4kV (see Fig.8① for recommended circuit) (perf. Criteria A); CS: IEC61000-4-6 10Vr.m.s (see Fig.8② for recommended circuit) (perf. Criteria A); Voltage High V: 2.1 -- (3.3); Voltage low level V: 0 -- (0.8) |