| Serie | VRF24_EB-150W(F)R3 |
| Modell | VRF2405EB-150W(F)R3 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Eingangsstrom (Volllast / Leerlauf) | 5/15/28V output: 6868/15 typ, 7022/30 max mA; Nominal input voltag: mA; 12/19/24V output: 6793/15 typ, 6944/30 max mA |
| Reflektierter Brummstrom | 50 (Nominal input voltage) |
| Stoßspannung (max. 1 s) | -0.7–50 |
| Start-up Voltage | 16 VDC |
| Input Under-voltage Protection | 14 typ, 12 min |
| Eingangsfilter | Pi filter |
| Hot-Plug | Unavailable (3.5-12VDC); Module on: Ctrl pin open or pulled high TTL (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin -Vin or pulled low (0-1.2VDC) mA; Input current when off: 10mA typ, 20mA max |
| Ctrl Start-up Delay Time | 30 ms typ, 50 ms max |
| Ausgangsspannungsgenauigkeit | ±1 typ, ±3 max |
| Lineare Regelung | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Lastregelung | ±0.5 typ, ±0.75 max (5%-100% load) |
| Transient Recovery Time | 25% load step change, n ominal input voltage: 200 µs typ, 400 µs max; 5V output: ±6 µs typ, ±10 µs max |
| Transient Response Deviation | 25% load step change: %; Other output: ±3% typ, ±5% max |
| Temperaturkoeffizient | ±0.03%/℃ (Full load) |
| Restwelligkeit und Rauschen | 180mVp-p typ, 250mVp-p max (5%-100%Io load) (20MHz bandwidth) |
| Trim | 90–110 %Vo |
| Sense | 105 |
| Übertemperaturschutz | 115℃ (Surface max. temperature) |
| Überspannungsschutz | 110–160 %Vo |
| Überstromschutz | 110–190 %Io (Input voltage range) |
| Kurzschlussschutz | Continuous, self-recovery |
| Isolation (Eingang–Ausgang) | 2250 VDC (electric strength test for 1 Input-output) |
| Isolation | VDC (minute with a leakage current) |
| Isolationswiderstand | Input-output resistance at 500VDC: 1000 MΩ |
| Isolationskapazität | 1000 pF (Input-output capacitance at 100KHz/0.1V) |
| Insulation type | Basic insulation (Input-output) |
| Operating Temperature Range | -40–+105℃ (see Fig. 1) |
| Lagertemperatur | -55 to +125℃; Wave soldering,10 seconds: 260℃ |
| Gehäusematerial | Black plastic; flame-retardant and heat-resistant (UL94 V-0) & Aluminum alloy case; VRF24_EB-150WR3: 60.80mm*25.00mm*12.70mm |
| Abmessungen | VRF24_EB-150WFR3: 60.80mm*36.83mm*12.70mm; VRF24_EB-150WR3: 50.6g (Typ.) |
| Gewicht | VRF24_EB-150WFR3: 55.6g (Typ.) |
| Kühlmethode | Natural convection or forced air convection |
| EMV-Emissionen | ; |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±6KV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (see Fig. 3-1 for recommended circuit) (perf. Criteria A); EFT: IEC/EN61000-4-4 100KHz ±2KV (see Fig. 3-2 for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2KV (see Fig. 3-2 for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 10 Vr.m.s (see Fig. 3-1 for recommended circuit) (perf. Criteria A) |