| Serie | VRB_LD-40WR3 |
| Modell | VRB2424LD-40WR3 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Eingangsstrom (Volllast / Leerlauf) | VRB2405LD-40WR3,: mA; 1894/60 typ, 1938/100 max mA; 24VDC input VRB2405LD-40WHR3(A4S): mA; Other outputs: 1852/12 typ, 1894/25 max mA; 48VDC input: 926/12 typ, 947/25 max mA |
| Reflektierter Brummstrom | Nominal input voltage: 30; 24VDC input: -0.7–50 |
| Stoßspannung (max. 1 s) | 48VDC input: -0.7–100; 24VDC input: 15.5 typ, 13 min |
| Input Under-voltage Protection | VDC; 48VDC input: 33 VDC typ, 26 VDC min; 24VDC input: 18 VDC |
| Start-up Voltage | 36 @48VDC input |
| Start-up Time | 10 ms typ, 150 ms max (Nominal input voltage & constant resistance load) |
| Eingangsfilter | Pi filter |
| Hot-Plug | Unavailable (3.5-12VDC); Module on: Ctrl pin open or pulled high (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 5mA typ, 10mA max |
| Ausgangsspannungsgenauigkeit | ±1 typ, ±3 max (VRB2405LD-40WHR3(A4S) ①) (VRB2405LD-40WR3,; 5%-100% load; 0%-100% load; Other outputs) |
| Lineare Regelung | Input voltage variation from low to high at full load: ±0.2% typ, ±0.5% max; VRB2405LD-40WR3,: %; 5%-100% load: % |
| Lastregelung | ±0.5 typ, ±1 max (VRB2405LD-40WHR3(A4S) ②) (0%-100% load; Other outputs) |
| Transient Recovery Time | 300 µs typ, 500 µs max; 25% load step change, VRB2405LD-40WR3,: µs; ±5 µs typ, ±8 µs max |
| Transient Response Deviation | nominal input voltage VRB2405LD-40WHR3(A4S): %; Other outputs: ±3% typ, ±5% max |
| Temperaturkoeffizient | ±0.03%/℃ (Full load) |
| Ripple & Noise ③ | 50 Mv p-p typ, 100 Mv p-p max (nominal input voltage, 100% load) (20MHz bandwidth) |
| Trim | ±10 %Vo |
| Überspannungsschutz | 110–160 %Vo |
| Überstromschutz | 110–190 %Io (Input voltage range) |
| Kurzschlussschutz | Hiccup, continuous, self-recovery |
| Isolation (Eingang–Ausgang) | VDC (Electric Strength Test for 1 minute with a) |
| Isolation | 1500 VDC |
| Isolationswiderstand | Input-output resistance at 500VDC: 1000 MΩ |
| Isolationskapazität | 2000 pF (Input-output capacitance at 100kHz/0.1V) |
| Betriebstemperatur | -40 to +85℃ (See Fig. 1) |
| Lagertemperatur | -55–+125℃ |
| Lagerfeuchtigkeit | Non-condensing: 5–95 %RH; Soldering spot is 1.5mm away from case for 10: %RH |
| Case Material Aluminum | alloy; Horizontal package: 50.80 × 25.40 × 11.80 mm |
| Without | heat sink A2S wiring package: 76.00 × 31.50 × 21.20 mm; A4S rail package: 76.00 × 31.50 × 25.80 mm |
| Abmessungen | Horizontal package: 51.40 × 26.20 × 16.50 mm |
| With heat | sink A2S wiring package: 76.00 × 31.50 × 25.30 mm; A4S rail package: 76.00 × 31.50 × 29.90 mm |
| Cooling Method Free air | convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B (see Fig.3-② for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig.3-② for recommended circuit) |
| EMV-Störfestigkeit | ; RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); ; ; |