| Serie | URB_YMD-10WR3 |
| Modell | URB2409YMD-10WR3 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Eingangsstrom (Volllast / Leerlauf) | 3.3VDC output: 429/5 typ, 440/12 max mA; 24VDC nominal input series,: mA; nominal input voltage: mA; Others: 502/5 typ, 521/12 max mA; 3.3VDC output: 190/4 typ, 215/8 max mA; 48VDC nominal input series,: mA; nominal input voltage: mA; Others: 251/4 typ, 258/8 max mA; 24VDC nominal input series, nominal input voltage: 40mA |
| Reflektierter Brummstrom | 48VDC nominal input series, nominal input voltage: 30; 24VDC nominal input series: -0.7–50 |
| Stoßspannung (max. 1 s) | 48VDC nominal input series: -0.7–100 VDC; 24VDC nominal input series: 9 VDC |
| Start-up Voltage | 48VDC nominal input series: 18; 24VDC nominal input series: 6.5 typ, 5.5 min |
| Input Under-voltage Protection | VDC; 48VDC nominal input series: 15.5 VDC typ, 12 VDC min |
| Start-up Time | 10 ms (Nominal input voltage & constant resistance load) |
| Eingangsfilter | Pi filter |
| Hot-Plug | Unavailable; Module on: Ctrl pin open or pulled high (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 6mA typ, 10mA max |
| Voltage Accuracy ① | ±1 typ, ±3 max; Input voltage variation from low to Vo1: ±0.2 typ, ±0.5 max (0%-100% load) |
| Lineare Regelung | high at full load Vo2: ±0.5% typ, ±1% max; Vo1: ±0.5% typ, ±1% max |
| Load Regulation ② | ±0.5 typ, ±1.5 max (Vo2) (5%-100% load; Dual output, Vo1 load at 50%, Vo2 load at range of) |
| Cross Regulation | ±5% (10%-100%) |
| Transient Recovery Time | 300 µs typ, 500 µs max; 25% load step change, nominal input voltage: µs |
| Transient Response Deviation | ±3% typ, ±5% max |
| Temperaturkoeffizient | ±0.03%/℃ (Full load) |
| Ripple & Noise ③ | 40mVp-p typ, 80mVp-p max (5%-100% load) (20MHz bandwidth) |
| Überspannungsschutz | 110–160 %Vo |
| Überstromschutz | 110–190 %Io (Input voltage range) |
| Kurzschlussschutz | Continuous, self-recovery |
| Isolation (Eingang–Ausgang) | VDC (Electric Strength Test for 1 minute with) |
| Isolation | 1500 VDC |
| Isolationswiderstand | Input-output resistance at 500VDC: 1000 MΩ |
| Isolationskapazität | 1000 pF (Input-output capacitance at 100kHz/0.1V) |
| Betriebstemperatur | -40 to +85℃ (See Fig. 1) |
| Lagertemperatur | -55–+125℃ |
| Lagerfeuchtigkeit | 5–95 %RH (Non-condensing) |
| Gehäusematerial | Aluminum alloy; Horizontal package (without heat sink): 25.40 × 25.40 × 11.70 mm; Horizontal package (with heat sink): 25.40 × 25.40 × 16.20 mm |
| Abmessungen | A2S chassis mounting: 76.00 × 31.50 × 21.20 mm; A4S DIN-rail mounting: 76.00 × 31.50 × 25.80 mm; Horizontal package/A2S chassis; without heat sink: 12.5g/36.0g/56.0g (Typ.) |
| Gewicht | mounting/A4S DIN-Rail mounting; with heat sink Horizontal package: 17g |
| Cooling method | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032; RE: CISPR32/EN55032 |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±4kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.3-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.3-①for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A); |