| Serie | URB24_LD-50W(H)R3(A2S)(A4S) |
| Modell | URB2424LD-50W(H)R3(A2S/A4S) |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Input Current (full load / | 2289/60 typ, 2341/100 max mA (Nominal input voltage) |
| Stoßspannung (max. 1 s) | -0.7–50 VDC |
| Start-up Voltage | 9 |
| Input Under-voltage Protection | 6.5 VDC typ, 5.5 VDC min |
| Start-up Time | 10 ms typ, 120 ms max (Nominal input voltage & constant resistance load) |
| Eingangsfilter | PI filter |
| Hot-Plug | Unavailable (3.0-12VDC); Module on: Ctrl pin open or pulled high TTL (3.0-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 6mA typ, 12mA max |
| Ausgangsspannungsgenauigkeit | ±1 typ, ±3 max (5%-100% load) |
| Lineare Regelung | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Lastregelung | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 250 µs typ, 500 µs max (25% load step change, nominal input voltage) |
| Transient Response Deviation | ±3% typ, ±5% max (25% load step change, input voltage range) |
| Temperaturkoeffizient | Full load: ±0.03%/℃; nominal input 12V output: 180 %/℃ typ, 250 %/℃ max (20MHz bandwidth) |
| Ripple & Noise ① | mV p-p; voltage, 5%-100% load 24V output: 240 typ, 300 max |
| Trim | 90–110 %Vo |
| Überspannungsschutz | 110–160 %Vo (Input voltage range) |
| Überstromschutz | 110–200 %Io |
| Kurzschlussschutz | Continuous, self-recovery |
| Isolation (Eingang–Ausgang) | VDC (Electric Strength Test for 1 minute with) |
| Isolation | 1500 VDC |
| Isolationswiderstand | Input-output resistance at 500VDC: 100 MΩ |
| Isolationskapazität | 2200 pF (Input-output capacitance at 100KHz/0.1V) |
| Betriebstemperatur | -40 to +105℃ (See Fig. 1) |
| Lagertemperatur | -55–+125℃ |
| Lagerfeuchtigkeit | 5–95 %RH (Non-condensing) |
| Gehäusematerial | Aluminum alloy; Horizontal package: 50.80 × 25.40 × 11.80 mm; Without heat sink A2S chassis mounting: 76.00 × 31.50 × 21.20 mm; A4S Din-rail mounting: 76.00 × 31.50 × 25.80 mm |
| Abmessungen | Horizontal package: 51.40 × 26.20 × 16.50 mm; With heat sink A2S chassis mounting: 76.00 × 31.50 × 25.30 mm; A4S Din-rail mounting: 76.00 × 31.50 × 29.90 mm; Horizontal package/A2S chassis; Without heat sink mounting: 39g(Typ.)/62g(Typ.)/82g(Typ.) |
| Gewicht | /A4S Din-rail mounting; Horizontal package/ A2S chassis; With heat sink: 48g(Typ.)/71g(Typ.)/91g(Typ.); mounting/ A4S Din-rail mounting |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B (see Fig. 3- for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig. 3- for recommended circuit) |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±4KV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 100KHz ±2KV (see Fig. 3- for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2KV (see Fig. 3- for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |