| Serie | VRF24_DD-50WR4 |
| Modell | VRF2424DD-50WR4 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Input Current (full load/no-load) | 2367/15 typ, 2422/30 max mA |
| Reflektierter Brummstrom | 300 |
| Stoßspannung (max. 1 s) | -0.7–50 @24VDC nominal input |
| Start-up Voltage | 18 VDC |
| Under-voltage Protection | 13 typ, 11 min |
| Start-up Time | 30 ms typ, 100 ms max (Nominal input & constant resistance load) |
| Eingangsfilter | C typ, filter max |
| Hot-Plug | Unavailable 3-12VDC); Module on: Ctrl pin open or pulled high (TTL 3-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 6mA typ, 12mA max |
| Output Voltage Accuracy ① | ±1% typ, ±3% max (5%-100% load) |
| Lineare Regelung | ±0.2 typ, ±0.5 max (Input voltage variation from low to high at full load) |
| Load Regulation ② | ±0.5% typ, ±1% max (5%-100% load) |
| Transient Recovery Time | 250 µs typ, 500 µs max (25% load step change, nominal input voltage) |
| Transient Response Deviation ③ | ±5% typ, ±8% max (25% load step change, input voltage range) |
| Temperaturkoeffizient | Full load: ±0.03%/℃; input voltage range, 5%-100%: %/℃ (20MHz bandwidth) |
| Ripple & Noise ④ | 250mVp-p typ, 350mVp-p max; load: mVp-p; Full operating temperature range, nominal input: mVp-p |
| Überbrückungszeit | 0.001 ms; voltage, full load: ms |
| Trim | 90–110 %Vo; Input voltage range: %Vo |
| Output Over-voltage Protection | 110–160 %Vo |
| Output Over-current Protection | 110–200 %Io (Normal temperature, input voltage range) |
| Output Short-circuit Protection | Continuous, self-recovery (Input voltage range) |
| Over-temperature protection | 140℃ |
| Isolation (Eingang–Ausgang) | VDC (Electric Strength Test for 1 minute with) |
| Isolation | 3000 VDC |
| Isolationswiderstand | Input-output resistance at 500VDC: 1000 MΩ |
| Isolationskapazität | 100 pF (Input-output capacitance at 100kHz/0.1V) |
| Operating Temperature (Tc) | -40 to +105℃ (See Fig. 1) |
| Lagerfeuchtigkeit | 5–95 %RH (Non-condensing) |
| Lagertemperatur | -55–+125℃ (Soldering spot is 1.5mm away from case for 10) |
| Gehäusematerial | Black plastic; flame-retardant and heat-resistant (UL94-V0) |
| Abmessungen | 25.82 x 22.80 x 7.20 mm |
| Gewicht | 12.9g(Typ.) |
| Cooling method | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B (see Fig.4-② for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig.4-② for recommended circuit) |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±6kV, Air ±8kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (see Fig.4-① for recommended circuit) (perf. Criteria A); EFT: IEC/EN61000-4-4 100kHz ±2kV (see Fig.4-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.4-①for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (see Fig.4-① for recommended circuit) (perf. Criteria A) |