| Serie | PV350-29BxxR3 |
| Modell | PV350-29B24R3 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Input Voltage Range | 1700 VDC |
| Eingangsstrom | 1500VDC: 0.4A max; 800VDC: 200A |
| Einschaltstrom | 1500VDC: 300A; Lockout activation range: 250–270 A (Cold start) |
| Input Under-voltage Protection | VDC; Lockout deactivation range: 270–290 VDC |
| Input Reverse Polarity Protection | Available; 1500VDC/6A, typ, required max |
| External Input Fuse | (brand: Adler models: A851600b00 base; models: typ, BH300) max base |
| Hot-Plug | Unavailable |
| Ausgangsspannungsgenauigkeit | ±1 typ, ±2 max (All load range) |
| Netzregelung | ±0.5% (Rated load) |
| Lastregelung | ±1 typ, ±1.5 max @1100VDC |
| Stand-by Power Consumption | 1500VDC: 3W; 12V: 120W; W (20MHz bandwidth) |
| Restwelligkeit und Rauschen | 24V/28V: 240mV max; mV; 48V: 300mV max ((peak-to-peak value)) |
| Temperaturkoeffizient | ±0.02%/℃; 110% - 330% Io, constant current mode |
| Überstromschutz | All input voltage range: when output voltage > 70%, automatic; recover after fault condition is removed |
| Kurzschlussschutz | Hiccup, continuous, self-recovery; 12V: ≤20V; 24V: ≤35V |
| Überspannungsschutz | Output voltage clamp or hiccup; 28V: ≤40V; 48V: ≤63V |
| Übertemperaturschutz | Output voltage turn off, self-recovery |
| Minimum Load | 0% |
| Überbrückungszeit | 10 ms @Room temperature, full load 1200VDC input |
| Start-up Delay Time | 1 s typ, 3 s max |
| Isolation (Eingang–Ausgang) | 4000 VAC |
| Isolation | VAC (Electric Strength Test for 1min.,) |
| Isolation (Input–⏚) | 4000 VAC (Shell) |
| Isolation (Output–⏚) | 2000 VAC (Shell) |
| Insulation Type | meet reinforced insulation (Input - output) |
| Isolationswiderstand | 100 MΩ (500VDC) |
| Betriebstemperatur | -40 to +85℃ |
| Lagertemperatur | -40–+85℃ |
| Lagerfeuchtigkeit | 95 %RH; 10-500Hz,2g,threedirectionsofX,Y,Zaxis,1H;GB/T %RH |
| Vibration Resistance | 2423.10 %/℃; +55℃ to +80℃: 2.4 %/℃; +80℃ to +85℃: 4.0 %/℃ |
| Output Power Derating | 300-400VDC: 0.2 %/VDC; 3000- 5000m: 10.0 %/Km; Design refer to CSA-C22.2 No.107.1-16, |
| Safety Standard | IEC62477; –EN62109-1 |
| Schutzklasse | CLASS I, CLASS II |
| MTBF | ≥300,000 h (MIL-HDBK-217F@25℃) |
| Gehäusematerial | Metal |
| Abmessungen | 234.50 x 81.00 x 42.00mm |
| Gewicht | 1000g (Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS A; RE: CISPR32/EN55032 CLASS A |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±6KV/Air ±8KV (Perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (Perf. Criteria A); EFT: IEC/EN61000-4-4 ±4KV (Perf. Criteria A); CS: IEC/EN61000-4-6 10Vr.m.s (Perf. Criteria A); PFMF: IEC/EN61000-4-8 30A/m (Perf. Criteria A) |