| Serie | HO1-P(N)-0.5C(0.6B) |
| Modell | HO1-P(N)-0.5C(0.6B) |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Reflected Ripple Current ① | 30mA |
| Stoßspannung (max. 1 s) | 9 VDC (HO1-P(N)1201-0.6B(-YS)) |
| Input Filter Type | Capacitance filter |
| Hot-Plug | Unavailable |
| Input Reverse Polarity | HO1-P(N)1201-0.6B(-YS): -9–0 VDC; The voltage between Vin and GND: VDC |
| protection | -15–0 (HO1-P(N)1501-0.5C(-YS)) |
| Adjust-point Tolerance | ±1 typ, ±2 max (Output voltage guaranteed range, see Fig.4) |
| Reference Voltage Accuracy | ±1% typ, ±2% max (0%-100% load) |
| Lineare Regelung | ±0.01% (Input voltage range, nominal output voltage, full load) |
| Lastregelung | ±0.01% (Nominal input voltage, nominal output voltage, 1) (0%-100% load) |
| On/Off Overshoot | Input voltage range, nominal output voltage: 3 %Vo; Nominal input voltage, nominal output voltage, full load, after: %Vo (0%-100% load) |
| Time Coefficient | ±0.001 %/Hr typ, ±0.003 %/Hr max; warming up for 30 minutes: %/Hr |
| Temperaturkoeffizient | Nominal input voltage, nominal output voltage, full load: ±100 PPM/℃ typ, ±200 PPM/℃ max; nominal HO1-P(N)1201-0.6B(-YS): 30% PPM/℃ (20MHz bandwidth) |
| Ripple & Noise ① | mVp-p; input voltage, HO1-P(N)1501-0.5C(-YS): 50mVp-p (0%-100% load) |
| Überstromschutz | 105–150 %Io (Input voltage range) |
| Kurzschlussschutz | Input voltage range: Constant current mode, continuous; 0-1.2V linear adjustment, set the product |
| Vadj (Output Voltage | output voltage by setting the voltage of (Input voltage range) |
| Adjustment Function) | Vadj pin |
| Betriebstemperatur | -40 to +85℃ (See Fig. 1) |
| Lagertemperatur | -40–+85℃ |
| Lagerfeuchtigkeit | 5–85 %RH (Non-condensing) |
| Gehäusematerial | Black plastic; flame-retardant and heat-resistant (UL94-V0); HO1-P(N)-0.5C(0.6B) series:: 15.00 x 15.00 x 18.00 mm |
| Abmessungen | HO1-P(N)-0.5C(0.6B)-YS series:: 15.50 x 15.50 x 18.30 mm |
| Gewicht | 7.0g (Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | ; RE: CISPR32/EN55032 CLASS B (without extra components) |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±4kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 100kHz ±2kV (see Fig.5-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.5-① for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |