| Serie | URB_ZP-10WR3 |
| Modell | URA4805ZP-10WR3 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Eingangsstrom (Volllast / Leerlauf) | 3.3VDC single output: 380/12 typ, 389/25 max mA; 24VDC nominal input series,: mA; 5VDC single output: 474/6 typ, 485/15 max mA; nominal input voltage: mA; others: 502/5 typ, 515/12 max mA; 3.3VDC single output: 192/5 typ, 197/20 max mA; 48VDC nominal input series,: mA; 5VDC single output: 240/6 typ, 245/15 max mA; nominal input voltage: mA; others: 251/4 typ, 258/8 max mA; 24VDC nominal input series, nominal input voltage: 40mA |
| Reflektierter Brummstrom | 48VDC nominal input series, nominal input voltage: 30; 24VDC nominal input series: -0.7–50 |
| Stoßspannung (max. 1 s) | 48VDC nominal input series: -0.7–100; 24VDC nominal input series: 9 |
| Start-up Voltage | VDC; 48VDC nominal input series: 18 VDC; 24VDC nominal input series: 6.5 VDC typ, 5.5 VDC min |
| Under-voltage Protection | 15.5 typ, 12 min @48VDC nominal input series |
| Eingangsfilter | Pi filter |
| Hot-Plug | Unavailable; Module on: Ctrl pin open or pulled high (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 6mA typ, 10mA max |
| Voltage Accuracy ① | ± 0.5 typ, ±2 max; Others: ±1 typ, ±3 max; Input voltage variation from low Vo1: ±0.2 typ, ±0.5 max (3.3VDC/5VDC; 0%-100% load; single output) |
| Lineare Regelung | to high at full load Vo2: ±0.5% typ, ±1% max; Vo1: ±0.5% typ, ±1% max |
| Load Regulation ② | ±0.5 typ, ±1.5 max (Vo2) (5%-100% load; Dual output, Vo1 load at 50%, Vo2 load at range of) |
| Cross Regulation | ±5% (25%-100%) |
| Transient Recovery Time | 300 µs typ, 500 µs max; 25% load step change, nominal 3.3VDC/5VDC: µs; ±5 µs typ, ±8 µs max |
| Transient Response Deviation | input voltage single output: %; Others: ±3% typ, ±5% max |
| Temperaturkoeffizient | ±0.03%/℃ (Full load) |
| Ripple & Noise ③ | 40mVp-p typ, 80mVp-p max (20MHz bandwidth) |
| Überspannungsschutz | Input voltage range: 110–160 %Vo; 3.3VDC/5VDC: %Vo; 110–230 %Vo |
| Überstromschutz | Input voltage range single output: %Io; Others: 110–190 %Io |
| Kurzschlussschutz | Continuous, self-recovery (Input voltage range) |
| Isolation (Eingang–Ausgang) | VDC (Electric Strength Test for 1 minute) |
| Isolation | 1500 VDC |
| Isolationswiderstand | Input-output resistance at 500VDC: 1000 MΩ |
| Isolationskapazität | 2000 pF (Input-output capacitance at 100kHz/0.1V) |
| Betriebstemperatur | -40 to +85℃ (See Fig. 1) |
| Lagertemperatur | -55–+125℃ |
| Lagerfeuchtigkeit | Non-condensing: 5–95 %RH; Soldering spot is 1.5mm away from case for 10: %RH |
| Gehäusematerial | Aluminum alloy |
| Abmessungen | 32.00 x 20.00 x 10.80mm |
| Gewicht | 12.0g(Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032; RE: CISPR32/EN55032 |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±4kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.3-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.3-①for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 10 Vr.m.s (perf. Criteria A) |