| Serie | K78_MT-500R4 |
| Modell | K7809MT-500R4 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| No-load Input Current | 0.1mA (Nominal input voltage) |
| Reverse Polarity at Input | Avoid / Not protected |
| Eingangsfilter | Capacitance filter 2.5~5VDC); Module on: Ctrl pin open ② or pulled high(TTL 2.5~5VDC) |
| Ctrl ① | Module off: Ctrl pin pulled low to GND(-Vo)(0~0.6VDC) uA; Input current when off: 240 uA |
| Notes: ①The positive output ctrl | is referenced to -Vo; (pin voltage is referenced to input GND; Negative output ctrl pin voltage) |
| ②The Ctrl pin needs to be | interference. (connected to +Vin pin if the electromagnetic environment with a large) |
| Ausgangsspannungsgenauigkeit | Full load, input 3.3 VDC output: ±2% typ, ±4% max; voltage range Others: ±2% typ, ±3% max |
| Lineare Regelung | ±0.2% (Full load, input voltage range) |
| Lastregelung | ±0.4% (Nominal input voltage, 1) (0% -100% load) |
| Restwelligkeit und Rauschen | 20mVp-p typ, 45mVp-p max (nominal input voltage, full load) (20MHz bandwidth) |
| Temperaturkoeffizient | ±0.02%/℃ (Operating temperature -40℃ to +105℃) |
| Transient Response Deviation | 50mV typ, 120mV max; Nominal input voltage, 25% load step change: mV |
| Transient Recovery Time | 0.2 ms typ, 0.8 ms max |
| Kurzschlussschutz | Continuous, self-recovery |
| Vtrim | ±10 %Vo (Input voltage range) |
| Betriebstemperatur | -40 to +105℃ (See Fig. 1) |
| Lagertemperatur | -55–+125℃ |
| Lagerfeuchtigkeit | Non-condensing: 5–95 %RH; Peak temperature ≤245℃, duration ≤60s |
| Reflow-Löttemperatur | max. over 217℃. Also refer to IPC/JEDEC; J-STD-020D.1. |
| Schaltfrequenz | 2.0MHz (Full load, nominal input voltage) |
| MTBF | 9152 k hours (MIL-HDBK-217F@25℃) |
| Feuchtigkeitsempfindlichkeitsstufe (MSL) | Level typ, 3 max (IPC/JEDEC J-STD-020D.1) |
| Pollution Degree | PD3 |
| Gehäusematerial | Black epoxy resin; flame-retardant and heat-resistant(UL94 V-0) |
| Abmessungen | 9.00 × 7.00 × 3.10mm |
| Gewicht | 0.58g(Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B (see Fig. 3-② for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig. 3-② for recommended circuit) |
| EMV-Störfestigkeit | ESD *: IEC/EN 61000-4-2 Contact ±6kV (perf. Criteria B); RS: IEC/EN 61000-4-3 10V/m (perf. Criteria A); CS: IEC/EN 61000-4-6 3Vr.m.s (perf. Criteria A); EFT: IEC/EN 61000-4-4 ±1kV (see Fig. 3-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN 61000-4-5 line to line ±1kV (see Fig. 3-① for recommended circuit) (perf. Criteria B) |