| Serie | VRB_YMD-10WR3 |
| Modell | VRA0524YMD-10WR3 |
| Typ | DC/DC-Wandler |
| Marke | MORNSUN |
| Input Current (full load / no load) | 3.3V output: 1964/100 typ, 2012/150 max mA; 5VDC nominal input series,: mA; 5V output: 2353/100 typ, 2410/150 max mA; nominal input voltage: mA; Others: 2500/10 typ, 2564/30 max mA; 12VDC nominal input series, nominal input voltage: 1004/5 typ, 1029/12 max mA; 24VDC nominal input series, nominal input voltage: 502/5 typ, 515/12 max mA; 48VDC nominal input series, 3.3V output: 208/4 typ, 215/8 max mA; nominal input voltage: mA; Others: 251/4 typ, 258/8 max mA; 5VDC / 12VDC nominal input series: 50mA |
| Reflektierter Brummstrom | 24VDC nominal input series: 40; 48VDC nominal input series: 30; 5VDC nominal input series: -0.7–16; 12VDC nominal input series: -0.7–25 |
| Stoßspannung (max. 1 s) | 24VDC nominal input series: -0.7–50; 48VDC nominal input series: -0.7–100; 5VDC nominal input series: 4.5; 12VDC nominal input series: 9 |
| Start-up Voltage | VDC; 24VDC nominal input series: 18 VDC; 48VDC nominal input series: 36 VDC; 5VDC nominal input series: 3.5 VDC typ, 3 VDC min; 12VDC nominal input series: 6.5 VDC typ, 5.5 VDC min |
| Input Under-voltage Protection | 24VDC nominal input series: 15.5 typ, 12 min; 48VDC nominal input series: 30 typ, 26 min |
| Start-up Time | 10 ms (Nominal input voltage & constant resistance load) |
| Eingangsfilter | Pi filter |
| Hot-Plug | Unavailable (3.5-12VDC); Module on: Ctrl pin open or pulled high TTL (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC); Input current when off: 6mA typ, 10mA max |
| Ausgangsspannungsgenauigkeit | 5VDC input, 3.3VDC output: ±1 typ, ±3 max; 5VDC input, Positive output: ±1 typ, ±2 max; other output Negative output: ±1 typ, ±3 max; Others: ±1 typ, ±3 max; Singe output: ±0.5% (0%-100% load; Input voltage variation 5VDC input) |
| Lineare Regelung | from low to high at full Dual output: ±1%; load: %; Others: ±0.2% typ, ±0.5% max; 5VDC input, 3.3VDC output: ±2%; 5VDC input, Singe output: ±1%; %; other output Dual output: %; ±1.5% (0%-100% load) |
| Load Regulation ① | 24VDC input: ±0.5 typ, ±1 max; 12VDC/48VDC input: ±0.5 typ, ±1 max; VRB0503YMD-10WR3: ±1% (5%-100% load) |
| Cross Regulation | ±5% (Input voltage range, 25%-100% load) |
| Transient Recovery Time | 25% load step change, nominal input voltage: 300 µs typ, 500 µs max; ±5V output, VRB4803YMD-10WR3,: µs; 25% load step change, VRB4805YMD-10WR3,: ±5 µs typ, ±8 µs max |
| Transient Response Deviation | VRB0503YMD-10WR3: %; nominal input voltage: %; Others: ±3% typ, ±5% max |
| Temperaturkoeffizient | ±0.03%/℃ (Full load) |
| Ripple & Noise ② | 40 mV p-p typ, 100 mV p-p max (5%-100% load) (20MHz bandwidth) |
| Überspannungsschutz | 110–160 %Vo |
| Überstromschutz | 110–190 %Io (Input voltage range) |
| Kurzschlussschutz | Continuous, self-recovery |
| Isolation (Eingang–Ausgang) | VDC (Electric Strength Test for 1 minute with a) |
| Isolation | 1500 VDC |
| Isolationswiderstand | Input-output resistance at 500VDC: 1000 MΩ |
| Isolationskapazität | 1000 pF (Input-output capacitance at 100kHz/0.1V) |
| Betriebstemperatur | -40 to +85℃ (See Fig. 1) |
| Lagertemperatur | -55–+125℃ |
| Lagerfeuchtigkeit | 5–95 %RH (Non-condensing) |
| Gehäusematerial | Aluminum alloy |
| Abmessungen | Horizontal package: 25.40 × 25.40 × 11.70 mm; VRB0505YMD-10WR3, VRB0503YMD-10WR3: 15.0g (Typ.) |
| Gewicht | Others: 12.5g (Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | ; |
| EMV-Störfestigkeit | ; RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT 5VDC nominal: input IEC/EN61000-4-4 ±2kV (see Fig.5-① for recommended circuit) (perf. Criteria B); Surge 5VDC nominal: input IEC/EN61000-4-5 line to line ±2kV (see Fig.5-①for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |