| Series | LO30-10Bxx |
| Model | LO30-10B15 |
| Brand | MORNSUN |
| Input Voltage Range (AC) | 85–264 VAC |
| Input Voltage Range (DC) | 100–370 VDC |
| Input Frequency | 47–60 Hz; 115VAC: 750 Hz |
| Input Current | mA; 230VAC: 450mA max; 115VAC: 20mA |
| Inrush Current | A; 230VAC: 40A |
| Leakage Current | 0.25mA typ, Max. max @240VAC/50Hz |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | ±2% |
| Line Regulation | ±0.5% (Full load) |
| Load Regulation | ±1% ((load balancing)) (0% - 100% Load) |
| Ripple & Noise | 50mV typ, 100mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Stand-by Power Consumption | 0.5W |
| Temperature Coefficient | ±0.02%/°C |
| Short Circuit Protection | Hiccup, continuous, self-recovery |
| Over-current Protection | ≥110%Io, typ, self-recovery max; 5VDC output: ≤7.5V Output voltage clamp or |
| Over-voltage Protection | 9VDC output: hiccup; ≤15V; 12VDC/15VDC output: ≤20V; 24VDC output: ≤30V; 48VDC output: ≤60V |
| Minimum Load | 0%; 115VAC input: 10% |
| Hold-up Time | ms; 230VAC input: 30 ms |
| Isolation (Input–Output) | 3000 VAC (Electric Strength Test for 1min., leakage current <5mA) |
| Operating Temperature | -25 to +70°C |
| Storage Temperature | -25–+85℃ |
| Storage Humidity | 90 %RH |
| Altitude | 2000 m; Wave-soldering: 260 ± 5℃; typ, time: 5 -10s max |
| Soldering Temperature | 360 ±10℃; typ, time: 3 - 5s max (Manual-welding) |
| Switching Frequency | 60kHz; -25°C to -10°C: 1.0 %/°C |
| Power Derating | +50°C to +70°C: 3.0; 85VAC - 140VAC: 0.55 %/VAC; Design refer to UL/IEC62368-1& EN62368-1, |
| Safety Standard | UL/EN60335-1 typ; BS EN62368-1; min |
| Safety Class | CLASS I I |
| MTBF | > 300,000 h (MIL-HDBK-217F@25°C) |
| Dimension | 76.20 x 50.80 x 27.00 mm |
| Weight | 65g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS B; RE: CISPR32/EN55032 CLASS B |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±6KV (Perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (Perf. Criteria A); EFT: IEC/EN61000-4-4 ±2KV (Perf. Criteria B); ; CS: IEC/EN61000-4-6 10Vr.m.s (Perf. Criteria A); Voltage: dips, short interruption IEC/EN61000-4-11 100% dip 1 periods, 30% dip 25 periods, |