| Series | LD40-23BxxR2 |
| Model | LD40-23B24R2 |
| Brand | MORNSUN |
| Input Voltage Range (AC) | 85–305 VAC |
| Input Voltage Range (DC) | 100–430 VDC |
| Input Frequency | 47–63 Hz; 115VAC: 1.0 Hz |
| Input Current | 230VAC: 0.6A max; 115VAC: 30A |
| Inrush Current | 60A @230VAC |
| Leakage Current | 0.1mA typ, RMS Max. max @277VAC/50Hz |
| Recommended External input Fuse | 3.15A/300V, slow-blow, required |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | ±2% |
| Line Regulation | Full load: ±0.5%; 5V: ±2% |
| Load Regulation | ±1% (12V/15V/24V/48V) (0% -100% load) |
| Ripple & Noise | 100mV typ, 150mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Temperature Coefficient | ±0.02%/℃ |
| Stand-by Power Consumption | 0.3W typ, 0.55W max |
| Short Circuit Protection | Hiccup, continuous, self-recovery |
| Over-current Protection | ≥130% Io, self-recovery; 5 VDC output: ≤6.3 VDC (Hiccup or clamp); 12 VDC output: ≤16 VDC (Hiccup or clamp) |
| Over-voltage Protection | 15 VDC output: ≤25 VDC (Hiccup or clamp); 24 VDC output: ≤35 VDC (Hiccup or clamp); 48 VDC output: ≤60 VDC (Hiccup or clamp) |
| Minimum Load | 0%; 115VAC input: 8% |
| Hold-up Time | ms; 230VAC input: 50 ms |
| Isolation Input-output | Electric Strength Test for 1min.,: VAC; 4200 VAC; leakage current <5mA: VAC |
| Insulation Resistance | Input - output At 500VDC: 100 MΩ |
| Operating Temperature | -40 to +85℃ |
| Storage Temperature | -40–+85℃ |
| Storage Humidity | 95 %RH; Wave-soldering: 260 ± 5℃; typ, time: 5 - 10s max %RH |
| Soldering Temperature | Manual-welding: 360 ± 10℃; typ, time: 3 - 5s max %/℃; -40℃ to -25℃ (85-200VAC Input): 4 %/℃; +50℃ to +70℃: 2.5 %/℃ |
| Power Derating | +70℃ to +85℃: 1.67 %/VAC; 85VAC - 100VAC: 1.33 %/VAC; 277VAC - 305VAC: 0.71 %/VAC |
| Altitude Derating | 2000m - 5000m: 6.67 %/Km; IEC/EN/BS EN 62368-1 safety approved; %/Km |
| Safety Standard | Design refer to UL62368-1; IEC/EN60335-1; EN61558-1 typ; IEC/EN62477-1; min |
| Safety Class | CLASS I I |
| MTBF | ≥500,000 h (MIL-HDBK-217F@25℃) |
| Case Material | Black plastic, flame-retardant and heat-resistant (UL94V-0) |
| Horizontal | package: 69.50 x 39.00 x 24.00mm |
| Dimension A2S chassis | mounting: 96.10 x 54.00 x 31.00mm |
| A4S Din-Rail | mounting: 96.10 x 54.00 x 35.60mm |
| Weight A2S chassis | mounting: 147g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | CE: CISPR32/EN55032 CLASS B; RE: CISPR32/EN55032 CLASS B |
| EMC Immunity | ESD: IEC/EN61000-4-2 Contact ±6KV/Air ±8KV (perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); ; Surge: IEC/EN61000-4-5 line to line ±2KV/line to PE ±4KV; CS: IEC/EN61000-4-6 10Vr.m.s (perf. Criteria A); Voltage dip,: short |