| Dòng sản phẩm | VRB_SB-75WR3 |
| Mã hàng | VRB2424SB-75WR3 |
| Loại | Bộ chuyển đổi DC/DC |
| Thương hiệu | MORNSUN |
| Input Current (full load/no-load) | 3434/-- typ, 3551/150 max mA (Nominal input voltage) |
| Dòng gợn phản xạ | 50 (Nominal input voltage, full load) |
| Điện áp xung (tối đa 1 giây) | -0.7–50 |
| Start-up Voltage | 16 VDC |
| Input Under-voltage Protection | 11 typ, 9 min |
| Start-up Time | 30 ms typ, 100 ms max (Nominal input voltage & constant resistance load) |
| Bộ lọc đầu vào | C typ, filter max |
| Cắm nóng | Unavailable; Module on: Ctrl pin open or pulled high (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to TTL (0-1.2VDC) mA; Input current when off: 20mA typ, 50mA max |
| Voltage Accuracy ① | ±1 typ, ±3 max (5%-100% load) |
| Độ ổn định tuyến tính | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Load Regulation ② | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 25% load step change, nominal input voltage: 0.5 ms; 25% load step change, 5V/6V output: ±5 ms typ, ±8 ms max |
| Transient Response Deviation | %; nominal input voltage Others: ±3% typ, ±5% max |
| Hệ số nhiệt độ | ±0.03%/℃ (Full load) |
| Ripple & Noise ③ | 240mVp-p max (5%-100% load) (20MHz bandwidth) |
| Trim | 85–110 |
| Sense | 105 %Vo |
| Bảo vệ quá áp | 110–160 %Vo (Input voltage range) |
| Bảo vệ quá dòng | 110–220 %Io |
| Bảo vệ ngắn mạch | Continuous, self-recovery |
| Cách ly (đầu vào–đầu ra) | VDC (Electric Strength Test for 1 minute with) |
| Cách ly | 1500 VDC |
| Điện trở cách điện | Input-output resistance at 500VDC: 1000 MΩ |
| Điện dung cách ly | 4700 pF (Input-output capacitance at 100kHz/0.1V) |
| Case Operating Temperature | -40–+105℃ (See Fig1) |
| Nhiệt độ bảo quản | -55 to +125℃; Soldering spot is 1.5mm away from case for 10: ℃ |
| Vật liệu vỏ | Black flame retardant and heat resistant plastic (UL94 V-0), aluminum alloy |
| Kích thước | 35.00 × 25.86 × 12.70 mm |
| Trọng lượng | 31.8g (Typ.) |
| Cooling method | Free air convection |
| Phát xạ EMC | ; |
| Miễn nhiễm EMC | ESD: IEC/EN61000-4-2 Contact ±6kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.3 for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.3 for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |