| Dòng sản phẩm | VCF48_EBO-120W(F)R3-N |
| Mã hàng | VCF4824EBO-120W(F)R3-N |
| Loại | Bộ chuyển đổi DC/DC |
| Thương hiệu | MORNSUN |
| Dòng điện đầu vào (đầy tải / không tải) | 05V/24V: 2703/20 typ, 2762/30 max mA; 12V: 2673/20 typ, 2732/30 max mA; Nominal input voltage: mA; 28V: 2677/30 typ, 2737/50 max mA; 48V: 2717/20 typ, 2778/30 max mA |
| Dòng gợn phản xạ | Nominal input voltage: 30; Continuous: 0–80 |
| Surge Voltage | -0.7–100 VDC (Transient(100ms max.)) |
| Start-up Voltage | 36 |
| Input Under-voltage Protection | 29 typ, 26 min (Nominal input voltage & constant resistance) |
| Start-up Time | 100 ms; load: ms |
| Bộ lọc đầu vào | Pi filter |
| Cắm nóng | Unavailable |
| Input Reverse Polarity Protection | Unavailable |
| Ctrl ① | Module turn-on: Ctrl pin pulled low to -Vin (0-1.2VDC); Module turn-off: Ctrl pin open or pulled high (TTL 3.5-12VDC); Input current when switched off: 3mA typ, 10mA max |
| Ctrl Start-up Delay Time | 30 ms typ, 50 ms max |
| Độ chính xác điện áp đầu ra | ±1 typ, ±3 max (0%-100% load) |
| Độ ổn định tuyến tính | ±0.2% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Độ ổn định tải | 5%-100% load: ±0.5 typ, ±0.75 max; 25% load step change, nominal 28V: 200 typ, 400 max |
| Transient Recovery Time | µs; input voltage, di/dt=2.5A/µs other: 200 µs typ, 500 µs max; 25% load step change, 05V: ±6 µs typ, ±10 µs max |
| Transient Response Deviation | %; di/dt=2.5A/µs other: ±3% typ, ±5% max |
| Hệ số nhiệt độ | Full load: ±0.03%/℃; 05V, 12V: 120 %/℃ typ, 150 %/℃ max; nominal input 24V: 125%/℃ (20MHz bandwidth) |
| Ripple & Noise ① | mVp-p; voltage, 5%-100% load 28V: 250mVp-p; 48V: 150mVp-p typ, 250mVp-p max |
| Trim | 90–110% |
| Sense | 105 |
| Over-temperature Protection ② | 135℃ (Product surface max. temperature) |
| Bảo vệ quá áp | 110–160 %Vo |
| Bảo vệ quá dòng | 110–170 %Io (Input voltage range) |
| Bảo vệ ngắn mạch | Continuous, self-recovery, time≤3 seconds |
| Cách ly (đầu vào–đầu ra) | VDC (Electric Strength Test for 1 minute with) |
| Cách ly | 2250 VDC |
| Điện trở cách điện | Input-output resistance at 500VDC: 1000 MΩ |
| Điện dung cách ly | 1000 pF (Input-output capacitance at 100KHz/0.1V) |
| Insulation type | Basic insulation (Input-output) |
| Nhiệt độ hoạt động | -40 to +100℃ (See Fig. 1) |
| Nhiệt độ bảo quản | -55–+125℃ |
| Độ ẩm bảo quản | Non-condensing: 5–95 %RH; Soldering spot is 1.5mm away from case for 10: %RH |
| Kích thước | VCF4805/12/24/28EBO-120WR3-N: 58.42 x 22.86 x 9.69 mm; VCF4848EBO-120WR3-N: 58.42 x 22.86 x 9.86mm; VCF48_EBO-120WFR3-N: 58.42 x 22.86 x 12.7mm; VCF48_EBO-120WR3-N: 27.0g(Typ.) |
| Trọng lượng | VCF48_EBO-120WFR3-N: 35.9g(Typ.) |
| Phương pháp làm mát | Natural convection or forced air convection |
| Phát xạ EMC | ; |
| Miễn nhiễm EMC | ESD: IEC/EN61000-4-2 Contact ±6KV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (see Fig. 6-1 and Fig. 6-2 for recommended circuit) (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2KV (see Fig. 6-1 and Fig. 6-2 for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2KV (see Fig. 6-1 and Fig. 6-2 for recommended (circuit) perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (see Fig. 6-1 and Fig. 6-2 for recommended circuit) (perf. Criteria A) |