| Dòng sản phẩm | VCB48_QBO-1300WR3A(D)-N |
| Mã hàng | VCB4812QBO-1300WR3A-N |
| Loại | Bộ chuyển đổi DC/DC |
| Thương hiệu | MORNSUN |
| Input Current (full load) | 28A max (Room temperature, Vin = 53 V) |
| No Load Input Loss | 6.6W (Room temperature, Vin = 53 V) |
| Input Capacitance Value | 5µF (Room temperature, Vin = 53 V) |
| Surge Voltage(100msec. max.) | -0.5–80 (Room temperature) |
| Max Input Voltage | Room temperature: 65 VDC; Output voltage enabled level, PMBus: VDC |
| Input Start-up Voltage ④ | 41–43 (configurable; Output voltage disable level, PMBus) |
| Input Under-voltage Protection | 39–41 (configurable) |
| Bộ lọc đầu vào | Pi filter; Unavailable, it is necessary to ensure that the |
| Cắm nóng | input and output capacitors without voltage; before loading and unloading the product |
| Module turn-on | 0–1.2 (Room temperature) |
| Module turn-off | 2.5–5.5 VDC (Room temperature) |
| CTRL flip typical value | 1.7 |
| Input current ② | 0.3mA |
| Ctrl ① Input loss during shutdown | 1W (Room temperature, Vin = 53 V) |
| | 1 (T) |
| Functional delay time | 1 ③: ms; VCB48_QBO-1300WR3: 11 ms typ, 20 ms max; Room temperature, A-N ⑤: ms |
| Start-up Delay Time | 201 typ, 210 max (Vin = 53 V VCB48_QBO-1300WR3) (2 ③; D-N) |
| Output Current Range | 0–100 %Io; Room temperature, Vin =: %Io; VCB48_QBO-1300WR3A-N: ±2 %Io max; 51-60 V, 0%-100%Io: %Io |
| Độ chính xác điện áp đầu ra | Room temperature, Vin =: %; VCB48_QBO-1300WR3D-N: ±2%; 51-60 V, 0%Io: % |
| Độ ổn định tuyến tính | ±0.2 typ, ±0.5 max (Vin = 51-60 V, 100%Io) (Room temperature, Vin =) |
| Độ ổn định tải | ±0.5 typ, ±0.75 max (VCB48_QBO-1300WR3A-N ⑫) (53 V, 0%-100%Io) |
| Transient Recovery Time | Vin = 53 V, 25-75-25% Io, di/dt = 2.5 A/μs: 250 µs typ, 450 µs max; Vin = 53 V, 25-75-25% Io, di/dt = 2.5 A/μs: ±3 µs typ, ±5 µs max |
| Transient Response Deviation | %; Vin = 53 V, 10-100-10% Io, di/dt = 2.5 A/μs: ±15% |
| Hệ số nhiệt độ | ±0.03%/℃ (100%Io) |
| Ripple & Noise ② | 100mVp-p max (Room temperature, Vin = 45-60 V, 0%-100%Io) |
| Output voltage regulation | 8–12 VDC (Room temperature, Vin = 45-60 V, 0%-100%Io) |
| Bảo vệ quá nhiệt | Product surface max. temperature: 110℃ typ, 120℃ max; Vin = 53 V, 10%Io: 14.4 %Vo |
| Bảo vệ quá áp | Response type: Output off, re-power on for recover A; Vin = 45-60 V, Room temperature(product temperature): 135A typ, 140A max; VCB48_QBO-1300WR3A-N: ①Hiccup, continuous, self-recovery A |
| Bảo vệ quá dòng | Response type: ②The minimum current limit for a group of N; devices in parallel is 140A*N (VCB48_QBO-1300WR3D-N; VCB48_QBO-1300WR3A-N) |
| Bảo vệ ngắn mạch | Vin = 45-60 V: Hiccup, continuous, self-recovery; Vin = 53 V, Constant VCB48_QBO-1300WR3A-N: 50 typ, 70 max (VCB48_QBO-1300WR3D-N) |
| 3 | 240 typ, 260 max (VCB48_QBO-1300WR3D-N) (resistance load) |
| Initialization time | From Vin ≥27V to ready enable: 18; The input voltage is enabled: 40 |
| delay time | Enable by CTRL or PMBus CTRL pin: 1; Default startup delay of PMBus: 1 |
| Output voltage on delay | 0–655 (TON_DELAY range) |
| time ⑤ | Accuracy (actual delay and set value): 1 ms; Default off delay of PMBus: 1 ms |
| Output voltage off delay | 0–655 (TOFF_DELAY range) |
| time ⑥ | Accuracy (actual delay and set value): 1; Room temperature, VCB48_QBO-1300WR3A-N ⑦: 10 typ, 15 max |
| 4 | 200 typ, 210 max (VCB48_QBO-1300WR3D-N ⑬) (0%-100%Io) |
| Output Voltage Start-up Delay | 15 (Room temperature, VCB48_QBO-1300WR3A-N) |
| Abnormal Fault Time ⑨ | 210 (0%-100%Io VCB48_QBO-1300WR3D-N) |
| Output voltage drop time | 10–655 (TON_RISE/TOFF_FALL range) (Room temperature, 0%-100%Io) |
| The output voltage rises/falls | 1; Default output voltage adjustment rate of PMBus: 0.1 (Accuracy of rise/fall time (actual rise/fall time and set; value)) |
| Output voltage adjustment | V/ms (VOUT_TRANSITION_RATE range) |
| rate ⑩ | 0.001–1.2 (Room temperature, 0%-100%Io, no current sharing, no) (parallel) |
| The VCB48_QBO-1300WR3A-N | see the picture below; (marked here indicates that ACS is disabled by default; T and T) |
| ⑤ By default, the minimum output | time. The TONn5t3t121t0t0t27t516.60t662.00t26.68t8.82t100tdelay-1 (voltage start-up delay time is 1ms, which is equivalent to the Enable 5 3 121 0 0 18 377.40 662.00 8.17 8.82 100 by 5 3 121 0 0 19 387.48 662.00 15.60 8.82 100 CTRL 5 3 121 0 0 20 405.00 662.00 6.47 8.82 100 or 5 3 121 0 0 21 413.40 662.00 20.86 8.82 100 PMBus 5 3 121 0 0 22 436.20 662.00 15.60 8.82 100 CTRL 5 3 121 0 0 23 453.84 662.00 11.44 8.82 100 Pin) |
| ⑥ The output voltage off delay takes | control. Under normal conditions, the power off does (effect only when the output is turned off by CTRL and PMBus CTRL) |
| ⑦ VCB48_QBO-1300WR3A-N When | voltage rise time, start time, output voltage (PMBus is used to enable ACS (bus current sharing) function, the output) |
| ⑧ Output voltage start-up delay | output voltage does not exceed the set value of (abnormal fault time refers to the time for attempting to restart when the) |
| output under-voltage fault (0x44). | need to restart; (If exceeds the time, it is regarded as a fault, the output will be off and) |
| ⑨ Output voltage drop time refers | When the output voltage is turned off by pressing (to the time when the output voltage drops from the set voltage to 1V.) |
| ⑩ The output voltage adjustment (0x21) in steady state operation. It | rate refers to the change speed of the output voltage when the output: voltage is adjusted online by the VOUT COMMAND; is not allowed to adjust the output voltage online when the current is: shared simultaneously; COMMAND |
| ⑫ After the current sharing function | controlled, and the load adjustment rate of the product is (is enabled, only the output voltage accuracy of the product is) |
| Cách ly (đầu vào–đầu ra) | 1500 VDC (Electric Strength Test for 1 Input-output) |
| Cách ly | VDC (minute with a leakage) |
| Điện trở cách điện | Input-output, resistance at 500VDC: 100 MΩ |
| Điện dung cách ly | 8200 pF (Input-output, 100KHz/0.1V) |
| Nhiệt độ hoạt động | -40 to +85℃ |
| Nhiệt độ bảo quản | -55–+125℃ |
| Độ ẩm bảo quản | 5–95 %RH (Non-condensing) |
| Vật liệu vỏ | Aluminum alloy case |
| Dimension | 58.4*36.8*: 14.2 mm |
| Trọng lượng | 85.8g (Typ.) |
| Phương pháp làm mát | Free air convection cooling or forced air cooling |
| Phát xạ EMC | CE: CISPR32/EN55032 CLASS A (see Fig. 4-1 for recommended circuit)/CLASS B (see Fig. 4-2 for (recommended circuit)); RE: CISPR32/EN55032 CLASS A (see Fig. 4-1 for recommended circuit)/CLASS B (see Fig. 4-2 for (recommended circuit)) |
| Miễn nhiễm EMC | ESD IEC61000-4-2: Contact ±4KV (see Fig.4-2 for recommended circuit) (perf.Criteria B); RS IEC61000-4-3: 10V/m (see Fig.4-2 for recommended circuit) (perf.Criteria A); CS IEC61000-4-6: 10Vr.m.s (see Fig.4-2 for recommended circuit) (perf.Criteria A) |