| Dòng sản phẩm | VRA_ZP-10WR3 |
| Mã hàng | VRA2415ZP-10WR3 |
| Loại | Bộ chuyển đổi DC/DC |
| Thương hiệu | MORNSUN |
| Dòng điện đầu vào (đầy tải / không tải) | 3.3VDC single output: 759/15 typ, 777/30 max mA; 12VDC input, nominal: mA; 5VDC single output: 958/15 typ, 980/30 max mA; input voltage: mA; others: 980/9 typ, 1028/15 max mA; 3.3VDC single output: 384/10 typ, 393/25 max mA; 24VDC input, nominal: mA; 5VDC single output: 474/5 typ, 485/12 max mA; input voltage: mA; others: 490/5 typ, 515/12 max mA; 3.3VDC single output: 190/8 typ, 195/20 max mA; 48VDC input, nominal: mA; 5VDC single output: 237/5 typ, 243/12 max mA; input voltage: mA; others: 245/4 typ, 258/8 max mA; 12VDC nominal input series, nominal input voltage: 50mA |
| Dòng gợn phản xạ | 24VDC nominal input series, nominal input voltage: 40; 48VDC nominal input series, nominal input voltage: 30; 12VDC nominal input series: -0.7–25 |
| Điện áp xung (tối đa 1 giây) | 24VDC nominal input series: -0.7–50; 48VDC nominal input series: -0.7–100; 12VDC nominal input series: 9 |
| Start-up Voltage | 24VDC nominal input series: 18 VDC; 48VDC nominal input series: 36 VDC; 12VDC nominal input series: 6.5 VDC typ, 5.5 VDC min |
| Input Under-voltage Protection | 24VDC nominal input series: 15.5 typ, 12 min; 48VDC nominal input series: 30.5 typ, 25 min |
| Bộ lọc đầu vào | Pi filter |
| Cắm nóng | Unavailable (3.5-12VDC); Module on: Ctrl pin open or pulled high (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC); Input current when off: 6mA typ, 10mA max |
| Voltage Accuracy ① | Positive output: ±0.5 typ, ±2 max; Negative output: ±1 typ, ±3 max; Full load, the input voltage is Positive output: ±0.2 typ, ±0.5 max (0%-100% load) |
| Độ ổn định tuyến tính | from low voltage to high: %; voltage Negative output: ±0.5% typ, ±1% max; Positive output: ±0.5% typ, ±1% max |
| Load Regulation ② | ±0.5 typ, ±1.5 max (Negative output) (5%-100% load; Dual output, main circuit with 50% load,) |
| Cross Regulation | ±5% (auxiliary circuit with 25%-100% load) |
| Transient Recovery Time | 300 µs typ, 500 µs max; 25% load step change,: µs; Nominal input voltage 3.3VDC/5VDC single output: ±5 µs typ, ±8 µs max |
| Transient Response Deviation | %; others: ±3% typ, ±5% max |
| Hệ số nhiệt độ | Full load: ±0.03%/℃; 5%-100% 3.3VDC/5VDC single output: 40 %/℃ typ, 80 %/℃ max (20MHz bandwidth) |
| Ripple & Noise ③ | mVp-p; load others: 40mVp-p typ, 100mVp-p max |
| Bảo vệ quá áp | Input voltage range: 110–160 %Vo; 3.3VDC/5VDC single output: 110–230 %Vo |
| Bảo vệ quá dòng | Input voltage range: %Io; others: 110–190 %Io |
| Bảo vệ ngắn mạch | Continuous, self-recovery (Input voltage range) |
| Cách ly (đầu vào–đầu ra) | VDC (Electric Strength Test for 1 minute with a) |
| Cách ly | 1500 VDC |
| Điện trở cách điện | Input-output resistance at 500VDC: 1000 MΩ |
| Điện dung cách ly | 2000 pF (Input-output capacitance at 100kHz/0.1V) |
| Nhiệt độ hoạt động | -40 to +85℃ (see Fig. 1) |
| Nhiệt độ bảo quản | -55–+125℃ |
| Độ ẩm bảo quản | Non-condensing: 5–95 %RH; Soldering spot is 1.5mm away from case for 10: %RH |
| Vật liệu vỏ | Aluminum alloy |
| Kích thước | 32.00 x 20.00 x 10.80 mm |
| Trọng lượng | 12.0g (Typ.) |
| Phương pháp làm mát | Free air convection |
| Phát xạ EMC | CE: CISPR32/EN55032 CLASS A (without external components)/ CLASS B (see Fig.3-② for (recommended circuit)); RE: CISPR32/EN55032 CLASS A (without external components)/ CLASS B (see Fig.3-② for (recommended circuit)) |
| Miễn nhiễm EMC | ESD: IEC/EN61000-4-2 Contact ±4kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.3-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.3-①for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 10 Vr.m.s (perf. Criteria A) |