| Dòng sản phẩm | VRB_S-10WR3 |
| Mã hàng | VRB2403S-10WR3 |
| Loại | Bộ chuyển đổi DC/DC |
| Thương hiệu | MORNSUN |
| Dòng điện đầu vào (đầy tải / không tải) | 3.3V output: 795/35 typ, 815/50 max mA; 12VDC nominal input series,: mA; 5V output: 969/35 typ, 992/50 max mA; nominal input voltage: mA; Others: 969/9 typ, 992/18 max mA; 3.3V output: 389/25 typ, 398/45 max mA; 24VDC nominal input series,: mA; 5V output: 474/25 typ, 485/45 max mA; nominal input voltage: mA; Others: 474/9 typ, 485/18 max mA |
| Dòng gợn phản xạ | 50; 12VDC nominal input voltage: -0.7–25 |
| Điện áp xung (tối đa 1 giây) | 24VDC nominal input voltage: -0.7–50 VDC; 12VDC nominal input voltage: 9 VDC |
| Start-up Voltage | 24VDC nominal input voltage: 18; 12VDC nominal input voltage: 6.5 typ, 5.5 min |
| Input Under-voltage Protection | VDC; 24VDC nominai input voltage: 15.5 VDC typ, 12 VDC min |
| Bộ lọc đầu vào | Capacitance filter |
| Cắm nóng | Unavailable; Module on: Ctrl pin open or pulled high (3.5-12VDC) |
| Ctrl | Module off: Ctrl pin pulled low to GND (0-1.2VDC) mA; Input current when off: 6mA typ, 10mA max |
| Voltage Accuracy ① | ±1.5 typ, ±2 max (5%-100% load) |
| Độ ổn định tuyến tính | ±0.25% typ, ±0.5% max (Input voltage variation from low to high at full load) |
| Load Regulation ② | ±0.5 typ, ±1 max (5%-100% load) |
| Transient Recovery Time | 300 µs typ, 500 µs max; 25% load step change 3.3V/5V output: ±5 µs typ, ±8 µs max |
| Transient Response Deviation | %; Others: ±3% typ, ±5% max |
| Hệ số nhiệt độ | ±0.03%/℃ (Full load) |
| Ripple & Noise ③ | 75 mV p-p typ, 150 mV p-p max (5%-100% load) (20MHz bandwidth) |
| Bảo vệ quá dòng | 110–230 %Io; Input voltage range: %Io |
| Bảo vệ ngắn mạch | Continuous, self-recovery |
| Vật liệu vỏ | Black plastic, flame-retardant and heat-resistant (UL94 V-0) |
| Dimension | 22.00 x 9.50 x 12.00 mm |
| Trọng lượng | 5.5g (Typ.) |
| Phương pháp làm mát | Free air convection (20LFM) |
| Phát xạ EMC | CE: CISPR32/EN55032 CLASS B (see Fig.4-② for recommended circuit); RE: CISPR32/EN55032 CLASS B (see Fig.4-② for recommended circuit) |
| Miễn nhiễm EMC | ESD: IEC/EN61000-4-2 Contact ±6kV (perf. Criteria B); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±2kV (see Fig.4-① for recommended circuit) (perf. Criteria B); Surge: IEC/EN61000-4-5 line to line ±2kV (see Fig.4-① for recommended circuit) (perf. Criteria B); CS: IEC/EN61000-4-6 3 Vr.m.s (perf. Criteria A) |