| Serie | LH25-23BxxR2 |
| Modell | LH25-23B12R2 |
| Marke | MORNSUN |
| Eingangsspannungsbereich (AC) | 85–305 VAC |
| Eingangsspannungsbereich (DC) | 100–430 VDC |
| Input Frequency | 47–63 Hz; 115VAC: 0.6 Hz |
| Eingangsstrom | 230VAC: 0.34A max; 115VAC: 20A |
| Einschaltstrom | 40A @230VAC |
| Ableitstrom | 0.25mA typ, RMS Max. max @277VAC/50Hz |
| Recommended External Input Fuse | 3.15A/300V, slow-blow, required |
| Hot-Plug | Unavailable |
| Ausgangsspannungsgenauigkeit | 3.3V output: ±3%; others: ±2% |
| Netzregelung | ±0.5% (Rated load) |
| Lastregelung | ±1% (0% - 100% load) |
| Minimum Load | 0 |
| Restwelligkeit und Rauschen | 50mV typ, 100mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Temperaturkoeffizient | ±0.02%/℃; 3.3V/5V/9V/12V/15V/24V: 0.3%/℃ |
| Stand-by Power Consumption | 230VAC: W; 48V: 0.4W; 115VAC input: 10W |
| Überbrückungszeit | ms; 230VAC input: 60 ms |
| Kurzschlussschutz | Hiccup, continuous, self-recover |
| Überstromschutz | ≥150%, typ, self-recover max; 3.3V/5V output: ≤7.5VDC typ, (Hiccup) max; 9V output: ≤15VDC typ, (Hiccup) max |
| Überspannungsschutz | 12V/15V output: ≤20VDC typ, (Hiccup) max; 24V output: ≤30VDC typ, (Hiccup) max; 48V output: ≤60VDC typ, (Hiccup) max |
| Adjustable Output Voltage (Trim) | ±10% typ, Vo max |
| Isolation (Eingang–Ausgang) | 4200 VAC |
| Isolation | VAC (Electric Strength Test for 1min.,) |
| Isolation (Input–⏚) | 2500 VAC |
| Isolation (Output–⏚) | 1250 VAC |
| Impulse Voltage | Withstand Input - negative pulses, interval ≥5s. There is no: 6000 VDC; breakdown discharge during the test.: VDC; Output -: 6000 VDC; Input - output: 100 VDC |
| Isolationswiderstand | Input - At 500VDC: 100 MΩ; Output -: 100 MΩ |
| Betriebstemperatur | -40 to +85℃ |
| Lagertemperatur | -40–+105℃ |
| Lagerfeuchtigkeit | 95 %RH; Wave-soldering, Max. 10 seconds: 255–265 %RH |
| Löttemperatur | ℃; Manual-welding, Max. 5 seconds: 350 to 370℃ |
| Schaltfrequenz | 65kHz; -40℃ to -25℃: 3.33; +50℃ to +70℃: 2.5 %/℃; +70℃ to +85℃: 0.67 |
| Power Derating | 85VAC - 100VAC: 1.00 %/VAC; 277VAC - 305VAC: 0.715; 2000m - 5000m: 6.67 %/Km; IEC/BS EN/EN62368-1, AS/NZS 62368.1 safety |
| Safety Standard | approved and design refer to UL62368-1; IEC62477-1 |
| Schutzklasse | CLASS I |
| MTBF | ≥300,000 h (MIL-HDBK-217F@25℃) |
| Gehäusematerial | Black plastic, flame-retardant and heat-resistant (UL94V-0) |
| Horizontal | package: 70.00 x 48.00 x 23.50 mm |
| A2 chassis | package: 96.10 x 54.00 x 32.00mm |
| A4 DIN-rail | package: 96.10 x 54.00 x 36.60mm |
| Gewicht | 120g (Typ.)/170g (Typ.)/210g (Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B; RE: CISPR32/EN55032 CLASS B |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±8KV/Air ±15KV (perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±4KV (perf. Criteria A); Surge: IEC/EN61000-4-5 line to line ±4KV/line to PE ±6KV; CS: IEC/EN61000-4-6 10Vr.m.s (perf. Criteria A); Voltage dip,: short interruption |