| Serie | LH05-23BxxR2 |
| Modell | LH05-23B24R2 |
| Marke | MORNSUN |
| Eingangsspannungsbereich (AC) | 85–305 VAC |
| Eingangsspannungsbereich (DC) | 100–430 VDC |
| Input Frequency | 47–63 Hz; 115VAC: 0.125 Hz |
| Eingangsstrom | 230VAC: 0.08A max; 115VAC: 15A |
| Einschaltstrom | 30A @230VAC |
| Ableitstrom | 0.25mA typ, RMS Max. max @277VAC/50Hz |
| Recommended External Input Fuse | 2A/300V, slow-blow, required |
| Hot-Plug | Unavailable |
| Ausgangsspannungsgenauigkeit | ±2% |
| Netzregelung | ±0.5% (Full load) |
| Lastregelung | ±1% (0% - 100% load) |
| Restwelligkeit und Rauschen | 100mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Stand-by Power Consumption | 0.3W @230VAC |
| Temperaturkoeffizient | ±0.02%/℃ |
| Kurzschlussschutz | Hiccup, continuous, self-recovery |
| Überstromschutz | ≥150%, typ, self-recovery max clamp); 3.3/5V output: ≤7.5VDC (Output voltage clamp); 9V output: ≤15VDC (Output voltage clamp) |
| Überspannungsschutz | 12/15V output: ≤20VDC (Output voltage clamp); 24V output: ≤30VDC (Output voltage clamp) |
| Minimum Load | 0%; 115VAC input: 15% |
| Überbrückungszeit | ms; 230VAC input: 80 ms |
| Isolation (Input–⏚) | 2500 VAC (PE) |
| Isolation | VAC (Electric Strength Test for 1min.,) |
| Isolation (Eingang–Ausgang) | 4000 VAC |
| Isolation (Output–⏚) | 1250 VAC (PE) |
| Impulse Voltage | 1.2/50us impulse waveform, three positive/ negative: VDC; Withstand Input - output pulses, interval ≥5s. There is no breakdown: 6000 VDC; discharge during the test.: VDC; Output - PE: 6000 VDC; Input - PE: 100 VDC |
| Isolationswiderstand | 100 MΩ (500VDC) |
| Betriebstemperatur | -40 to +85℃ |
| Lagertemperatur | -40–+85℃ |
| Lagerfeuchtigkeit | 95 %RH; Wave-soldering, Max. 10 seconds: 255–265 %RH |
| Löttemperatur | ℃; Manual-welding, Max. 5 seconds: 350–370℃; -40℃ to -25℃: 2℃; +55℃ to +70℃: 3.33 %/℃ |
| Power Derating | +70℃ to +85℃: 0.67 %/VAC; 85VAC - 100VAC: 1.66 %/VAC |
| Safety Standard | Design refer to IEC/UL/EN62368-1 |
| Schutzklasse | CLASS I |
| MTBF | MIL-HDBK-217F@25℃–>1000,000 h |
| Gehäusematerial | Black plastic, flame-retardant and heat-resistant (UL94V-0); Horizontal package: 48.50 x 36.00 x 20.50 mm |
| Dimension | A2 chassis mounting: 96.10 x 54.00 x 29.00mm; A4 Din-Rail mounting: 96.10 x 54.00 x 33.60mm; Horizontal package: 55g (Typ.) |
| Gewicht | A2 chassis mounting: 100g (Typ.); A4 Din-Rail mounting: 140g (Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B; RE: CISPR32/EN55032 CLASS B |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±8KV/Air ±15KV (perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±4KV (perf. Criteria A); Surge: IEC/EN61000-4-5 line to line ±4KV/line to PE ±6KV; CS: IEC/EN61000-4-6 10Vr.m.s (perf. Criteria A); Voltage dip,: short interruption |