| Serie | LH15-23BxxR2 |
| Modell | LH15-23B24R2 |
| Marke | MORNSUN |
| Eingangsspannungsbereich (AC) | 85–305 VAC |
| Eingangsspannungsbereich (DC) | 100–430 VDC |
| Input Frequency | 47–63 Hz; 115VAC: 0.37 Hz |
| Eingangsstrom | 230VAC: 0.22A max; 115VAC: 16A |
| Einschaltstrom | 30A @230VAC |
| Ableitstrom | 0.25mA typ, RMS Max. max @277VAC/50Hz |
| Recommended External Input Fuse | 2A/300V, slow-blow, required |
| Hot-Plug | Unavailable |
| Ausgangsspannungsgenauigkeit | 3.3V output: ±3%; others: ±2% |
| Netzregelung | ±0.5% (Full load) |
| Lastregelung | ±1% (0%-100% load) |
| Restwelligkeit und Rauschen | 50mV typ, 100mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Temperaturkoeffizient | ±0.02%/℃; 3.3V/5V/9V/12V/15V/24V: 0.3%/℃ |
| Stand-by Power Consumption | 230VAC: W; 48V: 0.5W |
| Kurzschlussschutz | Hiccup, continuous, self-recovery |
| Überstromschutz | ≥150%Io, typ, self-recovery max; 3.3/5V output: ≤7.5VDC typ, (Hiccup) max; 9V output: ≤15VDC typ, (Hiccup) max |
| Überspannungsschutz | 12/15V output: ≤20VDC typ, (Hiccup) max; 24V output: ≤35VDC typ, (Hiccup) max; 48V output: ≤60VDC typ, (Hiccup) max |
| Minimum Load | 0%; 115VAC input: 5% |
| Überbrückungszeit | ms; 230VAC input: 40 ms |
| Isolation (Eingang–Ausgang) | 4200 VAC |
| Isolation | VAC (Electric Strength Test for 1min.,) |
| Isolation (Input–⏚) | 2500 VAC (PE) |
| Isolation (Output–⏚) | 1250 VAC (PE) |
| Impulse Withstand Voltage | Input - PE negative pulses, interval >= 5s. There is no: 6000 VDC; breakdown discharge during the test.: VDC; Output - PE: 6000 VDC; Input - output: 100 VDC |
| Isolationswiderstand | Input - PE At 500VDC: 100 MΩ; Output - PE: 100 MΩ |
| Betriebstemperatur | -40 to +85℃ |
| Lagertemperatur | -40–+105℃ |
| Lagerfeuchtigkeit | 95 %RH; Wave-soldering: 260 ± 5℃; typ, time: 5 - 10s max %RH |
| Löttemperatur | 360 ± 10℃; typ, time: 3 - 5s max (Manual-welding) |
| Schaltfrequenz | 65 KHz; -40℃ to -25℃: 4.00; +55℃ to +70℃: 2.67 %/℃; +70℃ to +85℃: 1.33 |
| Power Derating | 85VAC-100VAC: 1.67 %/VAC; 277VAC-305VAC: 0.72; 2000m-5000m: 6.67 %/Km; BS EN/EN62368-1 safety approved;; Design refer to UL/IEC62368-1, IEC62477-1 (9V/48V output) |
| Safety Standard | IEC/BS EN/EN62368-1 safety approved; Design refer to UL62368-1; IEC62477-1 |
| Schutzklasse | CLASS I |
| MTBF | ≥500,000 h (MIL-HDBK-217F@25℃) |
| Gehäusematerial | Black plastic, flame-retardant and heat-resistant (UL94V-0) |
| Horizontal package | 62.00 x 45.00 x 22.50 mm |
| Dimension A2 chassis mounting | 96.10 x 54.00 x 31.00mm |
| A4 Din-Rail mounting | 96.10 x 54.00 x 35.60mm |
| Weight Horizontal | package/A2 chassis mounting/A4 Din-Rail mounting: 80g (Typ.)/125g (Typ.)/165g (Typ.) |
| Kühlmethode | Free air convection |
| EMV-Emissionen | CE: CISPR32/EN55032 CLASS B; RE: CISPR32/EN55032 CLASS B |
| EMV-Störfestigkeit | ESD: IEC/EN61000-4-2 Contact ±8KV/Air ±15KV (perf. Criteria A); RS: IEC/EN61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN61000-4-4 ±4KV (perf. Criteria A); Surge: IEC/EN61000-4-5 line to line ±4KV/ line to PE ±6KV; CS: IEC/EN61000-4-6 10Vr.m.s (perf. Criteria A); Voltage dip, short: interruption |