| Serie | LBF1000-13Bxx-NS |
| Modell | LBF1000-13B48-NS |
| Marke | MORNSUN |
| Eingangsspannungsbereich (AC) | 85–305 VAC |
| Eingangsspannungsbereich (DC) | 120–430 VDC |
| Input Voltage Frequency | 47–63 Hz; 115VAC: 10.8 Hz |
| Eingangsstrom | 230VAC: 5.3A max; Built-in inrush current 115VAC: 20A typ, 23A max |
| Einschaltstrom | external 10Ω resistor 230VAC: 40A typ, 46A max; Protection start: 50–75 A (suppression circuit, Cold start) |
| Input Under-voltage Protection | VAC; Protection release: 75–85 VAC |
| Ableitstrom | 277VAC: <0.75 mA; 115VAC: PF typ, ≥ 0.98 max |
| Leistungsfaktor | PF typ, ≥0.96 max @230VAC (Normal temperature, full load) |
| Total Harmonic Ratio Of Input | ≤10% (Normal temperature, full load) |
| Hot-Plug | Unavailable |
| Output Voltage Accuracy ① | ±2% (Full load range) |
| Netzregelung | ±1% (Rated load) |
| Lastregelung | ±2%; 25℃, LBF1000-13B28-NS: 150% (0% - 100% load; 20MHz bandwidth) |
| Ripple & Noise ② | mV; LBF1000-13B48-NS: 350mV max; 115/230VAC (main bus with external electrolytic: mV ((peak-to-peak value)) |
| Überbrückungszeit | 30 ms typ, 20 ms min; capacitor >1500uF): ms; LBF1000-13B28-NS: Vo≤40.6VDC (Hiccup, turn-off or clamp) |
| Output Over Voltage Protection | Vo≤60VDC (Hiccup, turn-off or clamp) (LBF1000-13B48-NS) |
| Kurzschlussschutz | Recover time <5s after the short circuit disappear: Hiccup, continuous, self-recover A; Output voltage 14VDC-19VDC,: A; output hiccup and constant current: 42–47 A; protection: A; LBF1000-13B28-NS Output voltage 19VDC-25VDC,: A; 42–47 A; output constant current protection: A; Output voltage 25VDC-33.6VDC,: A; 31–47 A; output constant current protection: A |
| Überstromschutz | Output voltage 24VDC-33VDC,: A; output hiccup and constant current: 24–28 A; protection: A; LBF1000-13B48-NS Output voltage 33VDC-43VDC,: A; 24–28 A; output constant current protection: A; Output voltage 43VDC-55.1VDC,: A; 18–28 A; output constant current protection: A; Input voltage 85VAC-170VAC Protect start: 95–125 A; Rated load: A; (base plate temperature) Protect release: 85–115 A |
| Übertemperaturschutz | ℃; Input voltage 170VAC-305VAC Protect start: 110 to 140℃; Rated load: ℃; (base plate temperature) Protect release: 100 to 130℃ |
| Isolation (Input–⏚) | 2500 VAC |
| Isolation | VAC (Electric test for 1min., leakage current <10mA (recommended) |
| Isolation (Eingang–Ausgang) | 3000 VAC |
| Isolation (Output–⏚) | 1500 VAC |
| Isolationswiderstand | MΩ (500VDC) |
| Betriebstemperatur | -40 to 100℃; The max temperature refer to the Aluminum base of PCB: ℃ |
| Lagertemperatur | -40–85℃ |
| Betriebsfeuchtigkeit | 20–90 %RH; Non-condensing: %RH |
| Lagerfeuchtigkeit | 10–95 %RH |
| Power Derating | Operating temperature derating: %/℃; 85VAC<Vin≤170VAC: 85; Input voltage derating *: ℃; 170VAC<Vin≤305VAC: 100; Altitude derating 2000m-5000m: 6.67 ℃/km; 14VDC-28VDC: Maximum output power Po=Vo*36; Output 28VDC-33.6VDC: Maximum output power 1008W; derating 24VDC-48VDC: Maximum output power Po=Vo*21; 48VDC-55.1VDC: Maximum output power 1008W (LBF1000-13B28-NS; voltage; LBF1000-13B48-NS; PC (2-6 PCS of the same product in parallel) maximum current) |
| Parallel Operation ① | 5–10%; -ON/OFF, +ON/OFF, end use Power on: 2–10 mA (≥50%Io) |
| Remote Switch ② | 0.15mA (recommendation Power off) |
| TRIM Output Voltage | 14–33.6 V @LBF1000-13B28-NS 230VAC input, full load |
| Adjustable Range ③ | LBF1000-13B48-NS range: 24–55.1 V; Compensation voltage should within the |
| Remote Compensation | -S, +S: range.; range of the voltage adjustable range.; IOG/ENA Normal state: L range. |
| Status Indication | maximum source voltage 35V) Fault state: H; Design refer to IEC/UL/EN 62368-1, ((maximum sink current 5mA,) |
| Safety Standard | GB4943.1 |
| Schutzklasse | CLASS I |
| MTBF | ≥500,000 h (MIL-HDBK-217F@25℃) |
| Pollution Degree | Level I |
| Warranty | 5 years (Aluminum substrate temperature: <100℃) |
| Gehäusematerial | Aluminum substrate+black Plastic(SABIC PC945) |
| Abmessungen | 160.00mm × 100.00mm × 13.40mm |
| Gewicht | 545g (Typ.); Conduction heat dissipation, it is necessary to ensure that the product aluminum substrate surface |
| Cooling Method * | temperature lower than 100℃ . |
| EMV-Emissionen | ; RE: CISPR32/EN55032 CLASS A (Recommended external circuit (1)) |
| EMV-Störfestigkeit | Harmonic: current IEC/EN61000-3-2 CLASS A (Recommended external circuit (1)); ESD: perf. Criteria B; RS: IEC/EN61000-4-3 10V/m (Recommended external circuit (1) perf. Criteria A); EFT (Input: port) IEC/EN61000-4-4 ±2KV (Recommended external circuit 1) (perf. Criteria B); Surge (Input: port) (perf. Criteria B); CS: IEC/EN61000-4-6 10Vr.m.s (Recommended external (circuit 1) perf. Criteria A) |