| Серия | TSHT |
| Модель | TSHT5.8-01 |
| Бренд | MORNSUN |
| Inductance ① | pin 2 to pin 1; pin 2 to pin 3: 146 μH; pin 5 to pin 4; pin 5 to pin 6: 185 μH; pin 2 to pin 1; pin 2 to pin 3: 0.34 μH |
| DCR Isolation | Ω; pin 5 to pin 4; pin 5 to pin 6: 0.41; 3000 VDC (Input-output Electric Strength Test for 1 minute with a; leakage current of 1mA max.) |
| Сопротивление изоляции | Input-output resistance at 500VDC: 1000 MΩ |
| Ёмкость изоляции | 20 pF (Input-output capacitance at 100kHz/0.1V) |
| Влажность хранения | 95 %RH |
| Рабочая температура | -40 to +125℃ (② Including temperature rise) |
| Storage Temperature ③ | -55–+125℃ |
| Пайка оплавлением | Peak temp.≤245℃, maximum duration time≤60s over |
| Temperature ④ | 217℃. |
| ②The temperature of | operating temperature range; (the transformer(ambient plus temperature rise) should be within the) |
| ④We suggest that | please refer to IPC/JEDEC J-STD-020D.1. (times of reflow soldering should not exceed twice, For actual application,) |
| Материал корпуса | Black plastic; flame-retardant and heat-resistant (UL94 V-0) |
| Габариты | 12.50 x 8.70 x 5.90mm |
| Вес | 0.6g (Typ.) |
| Способ охлаждения | Free air convection |
| Material certification Material | UL No. |
| Wire | E234867 |
| Case Varnish | E150608; E317427 |
| Phase Diagram | Turns Ratio (Np:Ns); Output voltage(VDC) Np-a:Ns-a Np-b:Ns-b; 5 1:1.1 (Typ.); Fig. 1 |
| Application Circuit | Table 1: Recommended parameters; IC MORNSUN SCM1201; C1 1µF/16V; C2 1µF/16V; D1 30V/400mA; D2 30V/400mA; Fig. 2 |
| 1. If it is required to further reduce | input and output ripple, the capacitance of C1 and C2 can be increased properly if required, and should |
| be connected close to the pin | terminal of the module. |
| 2. In order to ensure the converter | can work reliably with high efficiency, the minimum load should not less than 1% rated load when it is used. |
| If the needed power is indeed | small, please parallel a resistor on the output side ( The sum of the efficient power and resistor consumption |
| Dimensions and | Recommended Layout |
| 1. For additional information | on Product Packaging please refer to www.mornsun-power.com. Packaging bag number : 58210037, Roll |
| packaging bag number: | 58210038; |
| 2. If the product is not operated | within the required load range, the product performance cannot be guaranteed to comply with all |
| 3. Unless otherwise specified, | parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal |
| input voltage and rated | output load; |
| 4. All index testing methods | in this datasheet are based on our company corporate standards; |
| 5. We can provide other | analog transformer customization service, please contact our technicians directly for specific information; |
| 6. Our products shall be | classified according to ISO14001 and related environmental laws and regulations, and shall be handled by |
| Address: No. 5, Kehui St. 1, Kehui | Development Center, Science Ave., Guangzhou Science City, Huangpu District, Guangzhou, P. R. China |
| Tel: 86-20-38601850 | Fax: 86-20-38601272 E-mail: info@mornsun.cn www.mornsun-power.com |