| Серия | DOP-105CQ |
| Модель | DOP-105CQ |
| Тип | Человеко-машинный интерфейс и сенсорные панели |
| Бренд | DELTA |
| High color․Wide screen․ | Installation diagram: DOP-105CQ |
| User-friendly (Step 1:) | Step 2: |
| Delta Electronics, Inc. | the screws until reaching the panel cutouts. No.18, Xinglong Rd., Taoyuan City 33068, Taiwan Instruction Sheet (1) General precautions Thank you for purchasing this product. This DOP-105CQ instruction sheet provides information for the DOP-105CQ series HMI. Before using this product, please read through this instruction sheet carefully to ensure the correct use of the product. Please keep this sheet handy for quick reference whenever |
| batteries by yourself. | bottom of the HMI. This product can be used with other industrial automation equipment. Please read through this sheet carefully and install the product according to the instructions to avoid danger. Cleaning method: please use a dry cloth to clean the product. This product must be used at an altitude below 2,000 m (6561.68 ft). If the equipment is used in a manner not specified by the manufacturer, the protection provided |
| MODE1 (A) | COM1 D USB Slave |
| COM Port (Pin) | Type Wire gauge (AWG) Stripped length Torque RS-232 |
| B (COM2 / COM3) | E USB Host 7 - 8 mm |
| 1 (-) | Solid 24 - 12 5 kg-cm (4.3 lb-in) (0.28 - 0.31 inches) |
| C (Power input connector) | - - 7 - 8 mm |
| 3 (TXD) | Stranded 24 - 12 5 kg-cm (4.3 lb-in) (0.28 - 0.31 inches) (4) Mounting dimensions |
| 8 (CTS) | rating of the cable must be greater than 75°C (167°F). DOP-105CQ COM2 & COM3 |
| MODE1 (MODE2) | MODE3 |
| 9 (-) | D- - D- - RXD- Note: the mark “-” means connection is not required. (5) Installation and wiring Precautions: malfunction. (6) Hardware specifications |
| Model | DOP-105CQ |
| Panel type | 5.6" TFT LCD (65536 colors) |
| Resolution | 320 x 234 pixels LED backlight |
| Display | Backlight (half-life under room temperature 25°C > 20,000 hours)*1 Display 113.28 x 84.70 mm range |
| Brightness | 200 cd/m² (Typ.) |
| CPU | ARM Cortex-A8 (800 MHz) |
| Flash ROM | 256 Mbytes |
| RAM | 256 Mbytes |
| Touchscreen | 4-wire resistive touchscreen > 10,000,000 operated |
| Buzzer | Multi-tone frequency (2 - 4 kHz) / 80 dB |
| USB | 1 USB slave Ver 2.0; 1 USB host Ver 2.0 |
| COM1 | RS-232 (supporting flow control) *2 Serial |
| communication (COM2) | RS-232 / RS-485 *2 port |
| COM3 | RS-422 / RS-485 *2 |
| Approvals | (please use shielding network cable and magnetic ring with the filter of 300 ohm / 100 MHz) |
| Panel waterproof level | IP65 / NEMA4 (indoor use only) DC +24V (-15% to +15%) |
| Operation voltage*2 | (please use an isolated power supply) (Supplied by Class 2 or SELV circuit (isolated from MAINS by double insulation)) |
| Leakage current | 500 VAC for 1 minute (between DC24V terminal and FG terminal) |
| Power consumption | *3 6.86 W (Max) *3 |
| Backup battery | 3V lithium battery CR2032 × 1 About 3 years or more at 25°C (77°F) Backup battery life (subject to operation temperature and condition) |
| Operation temperature | 0°C to 50°C (32°F to 122°F) |
| Storage temperature | -20°C to +60°C (-4°F to 140°F) 10% to 90% RH [0 to 40°C (32 to 104°F)], |
| Operating environment | 10% to 55% RH [41 to 50°C (105.8 to 122°F)]; pollution degree: 2 Conforms to IEC61131-2: continuous vibration 5 Hz - 8.3 Hz with Vibration resistance amplitude 3.5 mm; 8.3 Hz - 150 Hz with amplitude 1G Conforms to IEC60068-2-27: 11 ms, 15 G Peak, in X, Y, Z Shock resistance directions each for 6 times Dimensions 184 x 144 x 50 (W) x (H) x (D) mm Mounting dimensions 172.4 x 132.4 (W) x (H) mm |
| Вес | Approx. 670 g Note: 1. The half-life of the backlight is defined as the maximum luminance being reduced by 50% when the maximum drive current is supplied to the HMI. The life of LED backlight shown here is estimated at the room temperature of 25°C (77°F) with ambient humidity. 2. The withstand voltage of the isolated power circuit is 1500 V peak for 1 minute. 3. The HMI power consumption is the power consumed when the HMI is not connecting with other |
| (3) Parça Açıklamaları | (5) Montaj ve Kablolama boşluk olduğundan emin olun. |
| Kullanıcı Dostu HMI Ürünleri () | Montaj için kullanılan panelin kalınlığı 5 mm’den (0,2inch’den) az olmalıdır. No.18, Xinglong Rd., Taoyuan City |
| 33068, Taiwan | Montaj için kullanılan panelin kalınlığı 5 mm’den az olmalıdır. |