| السلسلة | KUB9090QB(F)-20AxG |
| الطراز | KUB9090QB(F)-20ACG |
| العلامة التجارية | MORNSUN |
| Input Current (no-load) | Vin=48V,Vout=12V,Io=0A: 115mA; Vin=48V,Vout=48V,Io=0A: 210mA; Vin=48V,Vout=72V,Io=0A: 115mA |
| تيار التموج المنعكس | 150mA (Vin=72V,Vout=48V,Io=20A) |
| جهد الاندفاع (بحد أقصى 1 ثانية) | 100 VDC (1sec. Max.Non-Operating) |
| Start-up Voltage | 8 typ, 9 max |
| Under-voltage Protection | 5 VDC typ, 4.5 VDC min |
| حماية من زيادة الجهد | 95 %Vo (self-recovery) |
| مرشح الدخل | Pi filter |
| التوصيل أثناء التشغيل | Unavailable |
| Input Reverse Polarity Protection | Unavailable |
| Input Current Limit | 20A typ, 23A max; Ctrl pin pulled -VIN or pulled low; ( typ, 0-1VDC) max (Module on) |
| Ctrl | Module off: Ctrl pin open or pulled TTL to high(1.5-5.5VDC); Input current when off: 2mA |
| Output voltage accuracy ① | 3.3V-90Vo KUB9090QB(F)-20ASG: ±100mV–±2%*Vout-2%*Vout*Iout/Iomax; KUB9090QB(F)-20ACG: ±100mV–±2%*Vout-3%*Vout*Iout/Iomax; Nominal input voltage, KUB9090QB(F)-20ASG: -2%*Vout*Iout/Iomax(typ.) (5%~100%Io) |
| تنظيم الحمل | -3%*Vout*Iout/Iomax(typ.) (5%Io-100%Iomax KUB9090QB(F)-20ACG) |
| Transient Response Deviation | Vin=28V, Vout=12V, 25% load step change, 0.1A/uS: 1100mV; Vin=48V, Vout=48V, 25% load step change, 0.1A/uS: 1400mV; Vin=28V, Vout=12V, 25% load step change, 0.1A/uS: 300mV |
| Transient Recovery Time | uS; Vin=48V, Vout=48V, 25% load step change, 0.1A/uS: 1000 uS |
| معامل درجة الحرارة | Operating temperature -40℃ to +100℃: ±0.02%/℃; Vin=48V, Vout=12V, Io=20A: 50%/℃ (20MHz bandwidth) |
| Ripple & Noise ② | Vin=48V, Vout=48V, Io=20A: 200mVp-p; Vin=48V, Vout=90V, Io=9A: 200mVp-p (20MHz bandwidth) |
| حماية من ارتفاع درجة الحرارة | Maximum surface temperature of the product: 105℃; Input voltage range, output power range,: ℃ |
| Output Over-voltage Protection | 95 VDC; self-recovery: VDC |
| Output Current Limit | 20A typ, 23A max (Input voltage range, output power range) |
| Over current &Short-circuit Protection | Input voltage range: constant current adjustment; Input to set maximum output current: See Iset function for output current adjustment |
| Iset | Pin Voltage (floating): 3.3 VDC; Adjustable range of output current: 0–20 A; Input to set output voltage: See Vset function for output voltage adjustment |
| Vset | Pin Voltage (floating): 2.5 VDC; Adjustable range of output voltage: 0–90 VDC; See Sense function adjustment VDC |
| Sense | See part of Remote Sense Application: %Vo; 105 %Vo |
| العزل (الدخل–الخرج) | VDC (Input/Output - Shell, Electric Strength Test for 1 minute) |
| العزل | 500 VDC |
| Operating Temperature ① | -40 to +100℃ (Surface temperature) |
| درجة حرارة التخزين | -55–+125℃ |
| رطوبة التخزين | 5–95 %RH (Non-condensing) |
| مادة الغلاف | Aluminum alloy; KUB9090QB-20AxG: 57.9×36.8×12.7mm |
| الأبعاد | KUB9090QBF-20AxG: 57.9×55.88×12.7mm; KUB9090QB-20AxG: 80 g(Typ.) |
| الوزن | KUB9090QBF-20AxG: 83 g(Typ.) |
| طريقة التبريد | Free air convection forced convection |
| انبعاثات التوافق الكهرومغناطيسي | CE: CISPR32/EN55032 CLASS A (see Fig. 4 for recommended circuit); RE: CISPR32/EN55032 CLASS A (see Fig. 4 for recommended circuit) |
| مناعة التوافق الكهرومغناطيسي | ESD: IEC/EN 61000-4-2 Contact ±6kV (perf. Criteria B); RS: IEC/EN 61000-4-3 10V/m (perf. Criteria A); EFT: IEC/EN 61000-4-4 ±2kV (see Fig. 4 for recommended circuit) (perf. Criteria B); Surge: IEC/EN 61000-4-5 line to line ±2kV (see Fig. 4 for recommended circuit) (perf. Criteria B); CS: IEC/EN 61000-4-6 10Vr.m.s (perf. Criteria A) |