| Série | TTB05xx-1T |
| Modelo | TTB0505-1T |
| Marca | MORNSUN |
| Inductance(L) ① | 3.3V output: 560–1213 µH; pin 1 to pin 3 5V output: 499–1082 µH; 9V output: 442–958 µH; 3.3V output: 338–733 µH; pin 6 to pin 4 5V output: 623–1352 µH; 9V output: 1661–3598 µH; 3.3V output: 0.66 µH; pin 1 to pin 3 5V output: 0.63 µH; 9V output: 0.60 µH |
| DCR Isolation | Ω; 3.3V output: 0.59; pin 6 to pin 4 5V output: 0.77; 9V output: 1.3; 1650 VDC (Primary-Secondary Electric Strength Test for 1 minute; with a leakage current of 1mA max.) |
| Capacitância de isolamento | 20 pF (Primary-Secondary capacitance at 100kHz/0.1V) |
| Umidade de armazenamento | 95 %RH |
| Temperatura de operação | -40 to +125℃ (②) |
| Storage Temperature ③ | -55–+125℃ |
| Soldagem por refusão | Peak temp.≤245℃, maximum duration time≤60s over |
| Temperature ④ | 217℃. |
| ②The temperature of | operating temperature range; (the transformer(ambient plus temperature rise) should be within the) |
| ④We suggest that | please refer to IPC/JEDEC J-STD-020D.1. (times of reflow soldering should not exceed twice, For actual application,) |
| Material do invólucro | Black plastic; flame-retardant and heat-resistant (UL94V-0) |
| Dimensões | 6.50 x 8.80 x 3.60mm |
| Peso | 0.3g(Typ.) |
| Método de refrigeração | Free air convection |
| Material UL | No. |
| Wire | E234867 |
| Carretel | E150608 |
| Varnish | E317427 |
| Phase Diagram | Turns Ratio (Np:Ns); Output voltage(VDC) Np-a:Ns-a Np-b:Ns-b; 5 1:1.1 (Typ.); 3 1.29:1 (Typ.); 9 1:1.94 (Typ.); Fig. 1 |
| Application Circuit | Table 1: Recommended parameters; IC SCM1201ATA; C1 1µF/16V; C2 1µF/16V; D1 40V/400mA; D2 40V/400mA; Fig. 2 |
| 1. If it is required to further reduce | input and output ripple, the capacitance of C1 and C2 can be increased properly if required, and should |
| be connected close to the pin | terminal of the module. |
| 2. In order to ensure the converter | can work reliably with high efficiency, the minimum load should not less than 1% rated load when it is |
| used. If the needed power is | indeed small, please parallel a resistor on the output side ( The sum of the efficient power and resistor |
| consumption power is not less | than 1%). |
| Dimensions and | Recommended Layout |
| 1. For additional information | on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58200077; |
| 2. Unless otherwise specified, | parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH, 100kHz and |
| 3. All index testing methods in | this datasheet are based on our company corporate standards; |
| 4. We can provide other analog | transformer customization service, please contact our technicians directly for specific information; |
| 5. Our products shall be classified | according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified |
| Address: No. 8 Nanyun 4th Road, | Huangpu District, Guangzhou, China |
| Tel: 86-20-38601850 | Fax: 86-20-38601272 E-mail: info@mornsun.cn www.mornsun-power.com |