| Série | LIMF120-23Bxx |
| Modelo | LIMF120-23B24 |
| Marca | MORNSUN |
| Input Voltage Range (Rated) | 100–240 VAC |
| Faixa de tensão de entrada (CA) | 85–277 |
| Faixa de tensão de entrada (CC) | 120–390 VDC |
| Maximum Input Voltage | 305 VAC (Lasts for 2h without damage) |
| Input Voltage Frequency | 47–63 Hz; 115VAC: 1.5 Hz |
| Corrente de entrada | 0.75A max @230VAC |
| Inrush Current (Cold Start) | 115VAC: 15A; 230VAC: 30A; 115VAC Room temperature,: 0.98A |
| Fator de potência | 0.95 @230VAC full load |
| Start-up Delay Time | 3000 ms @115VAC/230VAC, rated load |
| Input Fuse | 8A (Built-in fuse) |
| Conexão a quente | Unavailable |
| Precisão da tensão de saída | ±1.0% (Full load range) |
| Regulação de linha | ±0.5% (Rated load) |
| Regulação de carga | ±1.0% (0% - 100% load) |
| Minimum Load | 0 |
| Stand-by Power Consumption | 5W |
| Power Consumption | 8 @230VAC, rated load |
| Ondulação e ruído | 100mV max ((peak-to-peak value)) (20MHz bandwidth) |
| Tempo de retenção | 35 ms |
| DC OK Signal | Resistive load: 30VDC/1A typ, Max. max; Room temperature: 150 typ, 110 min |
| Proteção contra sobrecorrente | 115VAC/230VAC High temperature, low: %; 105%; temperature: %; Hiccup mode, constant current works 1s (Typ.), |
| Proteção contra curto-circuito | turn off 10s, continuous, self-recover; 12V: ≤18VDC (Hiccup, self-recover) |
| Proteção contra sobretensão | 24V: ≤35VDC (Hiccup, self-recover); 48V: ≤60VDC (Hiccup, self-recover); 230VAC, Over-temperature protection start: 90 %Vo |
| Proteção contra sobretemperatura | ℃; rated load Over-temperature protection release: 60℃ |
| Isolation (Input–⏚) | 2500 VAC |
| Isolamento (entrada–saída) | 4000 VAC (Electric strength test for 1min., leakage current) |
| Isolamento | VAC (<10mA ( Isolation Test for need to remove the screw at) |
| Test | Output -: 500; DC OK - output: 500; Input - Ambient temperature: 25 ± 5℃: 500 (the mark shall *)) |
| Resistência de isolamento | Input - output Relative humidity: < 95%RH, no condensation: 500 MΩ; Output - Test voltage: 500VDC: 500 MΩ |
| Temperatura de operação | -40 to +85℃ |
| Temperatura de armazenamento | -40–+85℃ |
| Umidade de operação | 10–95 %RH; Non-condensing: %RH |
| Umidade de armazenamento | 20–90 %RH; PFC: 40–130 %RH |
| Frequência de comutação | kHz; DC-DC: 50–130 kHz; Auxiliary source: 65kHz |
| Power Derating | Operating temperature derating -40℃ to -25℃: 3.34; +60℃ to +70℃: 3 %/℃; +70℃ to +85℃: 3.34; Input voltage derating 85VAC - 100VAC: 1 %/VAC |
| Corrente de fuga | 240VAC Touch current: <0.88mA max BS; GB/T3836, safety approved & EN62368-1, BS; EN62368-1(Report) BS |
| Safety Standard | Design refer to UL61010-1; IEC/UL62368-1; UL508; IEC60079-0; –IEC60079-15; EN60335-1; EN62477-1; –71.04-2013 |
| Classe de segurança | CLASS I; MIL-HDBK-217F@25℃: >702,000h |
| MTBF | >524,000h (MIL-HDBK-217F@40℃) |
| Warranty | 5 years (Ambient temperature: <40℃) |
| High and Low Voltage Crossing | NB/T 31111-2017 (Test with Mornsun P/N: LUPS20-24F-N) |
| Material do invólucro | Metal (AL5052, SUS304) |
| Dimensões | 124.00mm × 121.00mm × 34.00mm |
| Peso | 540g (Typ.) |
| Método de refrigeração | Free air convection |
| Emissões EMC | CE (Input port): CISPR32 EN55032 150K - 30MHz (CLASS B); CE (Output port): CISPR32 EN55032 150K - 30MHz (CLASS A +20dB); RE: CISPR32 EN55032 30MHz - 2GHz (CLASS B) |
| Imunidade EMC | Harmonic current: IEC/EN61000-3-2 (CLASS A and CLASS D); Voltage flicker: EN61000-3-3; ESD: IEC/EN61000-4-2 Contact1±8KV/Air ±15KV; RS: IEC/EN61000-4-3 20V/m; EFT (Input port): IEC/EN61000-4-4 ±4KV; EFT (Output port): IEC/EN61000-4-4 ±2KV; Surge (Input port): IEC/EN61000-4-5 line to line ±3KV/line to ground ±6KV; Surge (Output: port) IEC/EN61000-4-5 line to line ±1KV/line to ground ±2KV (perf. Criteria A); Harmonic and: network signal IEC61000-4-13 CLASS 3; CS: IEC/EN61000-4-6 0.15 - 80MHz 20Vr.m.s; Voltage dips: IEC/EN61000-4-11; Voltage interruption: IEC/EN61000-4-11 0% of 200Vac, 0Vac, 5000ms (perf. Criteria C) |