| Série | LIB20-24 |
| Modelo | LIB20-24 24 20 480 |
| Marca | MORNSUN |
| Charging Voltage Range | 23–30 VDC (DC input) |
| Charging Current | 900mA max |
| Standby consumption current | 100mA |
| Charging time | 15 S typ, 25 S max |
| Operating voltage mode | 22/Vin-1 (Select by mode switch) |
| Operating voltage range | 22–30 V |
| Output current | 20A |
| Ripple noise | peak-to-peak: 150mV max; Output 22V/20A: 400 mS typ, 250 mS min (20MHz bandwidth) |
| Buffer time | Output22V/10A: 800 S typ, 500 S min; Output22V/0.1A: 50 S typ, 30 S min |
| Over-voltage protection | 31-37.5V, Locked Vdc |
| Over-load protection | ≥120%Io,Locked ,Power off and restart |
| Short-circuit protection | Lock protection,Power off and restart |
| Input reverse protection | No damage, self-healing; When the terminal voltage is lower than; 22Vdc, start buffering (Fix 22Vdc) |
| Switch selection | When the terminal voltage drops by more; Vin-1: +Vs-V; than 1V, start buffering +Vs-V; +Vs-V (I) <6V, buffer module on, |
| Controls | Inhibit(I): (I) >10V, buffer module off (35Vdc /4mA; Max) /4mA; Fully charged: V (R) >Vs-2VDC, /4mA; Ready(R): Not full: V (R) <1VDC /4mA; /4mA Max) typ, (35Vdc min; Buffering mode: V(B)>+Vs - 2Vdc; /4mA |
| Signal LED | Buffering (B): Other mode: V(B)<1Vdc; /4mA Max) typ, (35Vdc min; 10~35VDC/10mA(Connect typ, to max +V or; external voltage source); Fully charged: Remain lighting; Discharged/protected: Light off; Charging: 1Hz flicker; Buffering: 10Hz flicker (+VS supply) |
| Isolation Test | Electric strength test for 1min., leakage current <5mA: 2000 VDC; ut -: VDC |
| Insulation Input&Outp | Test voltage:500VDC: 50 MΩ; Resistance ut -: MΩ |
| Temperatura de operação | -40 to +85℃ |
| Temperatura de armazenamento | -40–+85℃ |
| Umidade de armazenamento | Non-condensing: 90 %RH; Operating temperature -40℃ to -25℃: 2.67 %RH |
| Power Derating | %/℃; derating +75℃ to +85℃: 2 %/℃; Design refer to IEC/EN/UL62368-1, %/℃ |
| Safety Standard | GB4943.1 typ; UL61010-1; min |
| Classe de segurança | CLASS I |
| MTBF | >1000,000 h (MIL-HDBK-217F@25℃) |
| Item | Standard (Operating Conditions) |
| High and Low Temperature | GB2423.1、IEC60068-2-1 (Working +85℃,-40℃) |
| Sinusoidal Vibration | GB2423.10、IEC60068-2-6 (10 - 500Hz, 2g, three directions of X, Y, Z axis) |
| Alternating Hot and Humid | GB2423.4、IEC60068-2-30 (+25℃,95%RH - +60℃,95%RH) |
| Low Temperature Storage | GB2423.1、IEC60068-2-1 (-40℃) |
| High Temperature Storage | GB2423.2、IEC60068-2-2 (+85℃) |
| High Temperature Aging | GB2423.2、IEC60068-2-2 (+60℃) |
| Normal Temperature Aging | GB2423.1、IEC60068-2-1 (+25℃) |
| Temperature Shock | GB2423.22、IEC60068-2-14 (-40℃ to +85℃) |
| Temperature Cycle | GB2423.22、IEC60068-2-14 (-25℃ to +60℃) |
| Hot and Humid | GB2423.50、IEC60068-2-67 (+85℃,85%RH) |
| High Temperature Elevation | GB2423.26、IEC60068-2-41 (+60℃,54KPa) |
| Low Temperature Elevation | GB2423.25、IEC60068-2-40 (-25℃,54KPa) |
| Constant Humid and Hot | GB2423.3、IEC60068-2-78 (+40℃,95%RH) (5 - 10Hz,ASD 0.3 - 10g²/Hz, three directions of X,) |
| Random Vibration | 4798.2-2008、IEC60721-3-2 typ, GB/T min (Y, Z axis) |
| Sinusoidal Vibration Response | GB/T–11287-2000、IEC60255-21-1 (10 - 150Hz,2g,three directions of X, Y, Z axis) |
| Sinusoidal Impulse Response | GB/T–114537-1993、IEC60255-21-2 (15g, pulse duration 11ms, three times in each) |
| Packaging Drop | GB2423.8、IEC68-2-32 (1m, one corner, three edges and six sides) |
| Material do invólucro | Metal(AL5052, SGCC) |
| Dimensões | 114.30mm x 63.00mm x 125.00mm |
| Peso | 910g (Typ.) |
| Método de refrigeração | Air cooling |