| Série | DOP-110CG |
| Modelo | DOP-110CG |
| Tipo | IHM e painéis de toque |
| Marca | DELTA |
| (3) Description of each part | (5) Installation and wiring malfunction. adjacent objects or walls. |
| Instruction Sheet (Step 1:) | Step 2: |
| (1) General precautions | the screws until reaching the panel cutouts. Thank you for purchasing this product. This DOP-110CG instruction sheet provides information for the DOP-110CG series HMI. Before using this product, read through this instruction sheet carefully to ensure the correct use of the product. Keep this sheet handy for quick reference whenever needed. Before finishing reading this sheet, follow the instructions below: |
| CO M3 (CO M1) | IN (2) Communication port pin assignment MODE1 |
| A | (24 AWG wire min.) |
| B | COM2 / COM3 RS-232 |
| 2 (RXD) | C COM1 D USB Slave |
| 7 (RTS) | Wiring: (4) Mounting dimensions |
| 9 (-) | DOP-110CG Type Wire gauge (AWG) Stripped length Torque |
| 285.2 ((11.23")) | 7 - 8 mm |
| Solid (24 - 12) | 5 kg-cm (4.3 lb-in) (0.28 - 0.31 inches) DOP-110CG COM2 7 - 8 mm |
| MODE1 (MODE2) | MODE3 Stranded 24 - 12 5 kg-cm (4.3 lb-in) |
| 38.5 (2.02") | (0.28 - 0.31 inches) |
| COM Port (Pin) | COM2 COM3 COM2 COM3 COM2 COM3 |
| 1 (-) | - D+ - - TXD+ Refer to the following diagram when wiring the power connector. The temperature rating of +1.0 0 .0 |
| 5 (GND) | GND GND 224 (8.82 ") |
| Model | DOP-110CG |
| Panel type | 10.4" TFT LCD (65535 colors) |
| Resolution | 800 x 600 pixels |
| Display (Backlight) | LED back light (half-life under room temperature 25°C > 20,000 hours)*1 |
| Display range | 211.2 mm * 158.4 mm |
| Brightness | 300 cd / m² (Typ.) |
| CPU | ARM Cortex-A8 (800 MHz) |
| Flash ROM | 256 Mbytes |
| RAM | 256 Mbytes |
| Touchscreen | 4-wire resistive touchscreen > 1,000,000 operated |
| Buzzer | Multi-tone frequency (2 - 4 kHz) / 80 dB |
| USB | 1 USB Slave Ver 2.0; 1 USB Host Ver 2.0 |
| COM1 | RS-232 (supports flow control) *2 Serial |
| communication (COM2) | RS-232 (supports flow control) / RS-485 *2 port |
| COM3 | RS-422 / RS-485 *2 |
| Cooling method | Natural cooling CE (use shielding network cable and magnetic ring with the filter of Approvals 300 ohm / 100 MHz) |
| Panel waterproof level | IP65 / NEMA4 (indoor use only) DC +24V (-15% to +15%) (use an isolated power supply) Operation voltage*2 Supplied by Class 2 or SELV circuit (isolated from MAINS by double insulation) |
| Leakage current | 500 VAC for 1 minute (between DC24V terminal and FG terminal) |
| Power consumption*3 | 8 W (Max.) *3 |
| Backup battery | 3V lithium battery CR2032 × 1 About 3 years or more at 25°C (77°F) Backup battery life (subject to operation temperature and condition) |
| Operation temperature | 0°C to 50°C (32°F to 122°F) |
| Storage temperature | -20°C to +60°C (-4°F to 140°F) 10% to 90% RH [0°C to 40°C (32°F to 104°F)], Operating environment 10% to 55% RH [41°C to 50°C (105.8°F to 122°F)], pollution degree: 2 Conforms to IEC61131-2: continuous vibration 5 Hz - 8.3 Hz with amplitude Vibration resistance 3.5 mm; 8.3 Hz - 150 Hz with amplitude 1G Conforms to IEC60068-2-27: 11 ms, 15 G Peak, in X, Y, Z directions each Shock resistance for 6 times |
| Peso | Approx.1735 g Note: 1. The half-life of the backlight is defined as the maximum luminance being reduced by 50% when the maximum drive current is supplied to the HMI. The life of LED backlight shown here is estimated at the room temperature of 25°C (77°F) with ambient humidity. 2. The withstand voltage of the isolated power circuit is 1500V peak for 1 minute. 3. The HMI power consumption is the power consumed when the HMI is not connecting with other |
| (3) Parça Açıklamaları | (5) Montaj ve Kablolama boşluk olduğundan emin olun. |