| Series | TTFxxxx-1T(2T) |
| Model | TTF0515-2T |
| Brand | MORNSUN |
| Inductance(L) ① | pin 1 to pin 3: 300–1200 μH; TTF0503-1T/2T: μH; pin 4 to pin 6: 170–520 μH; pin 1 to pin 3: 300–1200 μH; TTF0505-1T/2T: μH; pin 4 to pin 6: 280–840 μH; pin 1 to pin 3: 300–1200 μH; TTF0509-1T/2T: μH; pin 4 to pin 6: 1050–3100 μH; pin 1 to pin 3: 300–1200 μH; TTF0512-1T/2T: μH; pin 4 to pin 6: 640–1900 μH; pin 1 to pin 3: 300–1200 μH; TTF0515-1T/2T: μH; pin 4 to pin 6: 1210–3600 μH; pin 1 to pin 3: 300–1200 μH; TTF0524-1T/2T: μH; pin 4 to pin 6: 1570–4700 μH; pin 1 to pin 3: 780–2340 μH; TTF1205-1T/2T: μH; pin 4 to pin 6: 165–495 μH; pin 1 to pin 3: 750–2250 μH; TTF1212-1T/2T: μH; pin 4 to pin 6: 780–2340 μH; pin 1 to pin 3: 2050–6150 μH; TTF2405-1T/2T: μH; pin 4 to pin 6: 95–285 μH; pin 1 to pin 3: 300 μH; TTF0503-1T/2T: μH; pin 4 to pin 6: 315 μH; pin 1 to pin 3: 300 μH; TTF0505-1T/2T: μH; pin 4 to pin 6: 350 μH; pin 1 to pin 3: 300 μH; TTF0509-1T/2T: μH; pin 4 to pin 6: 1000 μH; pin 1 to pin 3: 300 μH; TTF0512-1T/2T: μH; pin 4 to pin 6: 900 μH; pin 1 to pin 3: 300 μH |
| DCR Isolation | TTF0515-1T/2T: mΩ; pin 4 to pin 6: 1000; pin 1 to pin 3: 300; pin 4 to pin 6: 1300; pin 1 to pin 3: 1104; pin 4 to pin 6: 550; pin 1 to pin 3: 1000; pin 4 to pin 6: 1104; pin 1 to pin 3: 1870; pin 4 to pin 6: 460; 3000 VDC (TTF0524-1T/2T; TTF1205-1T/2T; TTF1212-1T/2T; TTF2405-1T/2T; Primary-Secondary Electric Strength Test for 1; minute with a leakage current of 1mA max.) |
| Isolation Capacitance | Primary-Secondary capacitance at 100kHz/0.1V: 20 pF; 5V input: 15 pF |
| Voltage-Time ② | 12V input: 33 Vus; 24V input: 66 Vus |
| Storage Humidity | 5–95 %RH (Non-condensing) |
| Operating Temperature ③ | -40 to +105℃ |
| Storage Temperature ④ | -55–+125 time≤150s; Peak temp.≤245℃, maximum duration time≤150s |
| Reflow Soldering Temperature ⑤ | over 217℃. |
| Moisture Sensitivity Level (MSL) | Level typ, 1 max (IPC/JEDEC J-STD-020D.1) |
| ③The temperature of the | operating temperature range; (transformer(ambient plus temperature rise) should be within the) |
| ⑤We suggest that times of | please refer to IPC/JEDEC J-STD-020D.1. (reflow soldering should not exceed twice, For actual application,) |
| Case Material | Black plastic; flame-retardant and heat-resistant (UL94 V-0) |
| Dimensions | 12.50 x 8.70 x 5.90mm |
| Weight | 0.6g(Typ.) |
| Cooling Method | Free air convection |
| Material certification Material | UL No. |
| Wire | E234867 |
| Bobbin | E150608 |
| Phase Diagram | Turns Ratio (Np:Ns); Part No. N1a: N2a N1b: N2b; TTF0503-1T/2T 1: 0.73 (Typ.); TTF0505-1T/2T 1: 1.08 (Typ.); TTF0509-1T/2T 1: 1.93 (Typ.); TTF1205-1T/2T 1: 0.462 (Typ.); Fig. 1 TTF1212-1T/2T 1:1.040(Typ.); TTF2405-1T/2T 1: 0.220 (Typ.); Turns Ratio (Np:Ns); Part No. Np-a: Ns Np-b: Ns; TTF0512-1T/2T 1: 2.63 (Typ.); TTF0515-1T/2T 1: 3.22(Typ.); TTF0524-1T/2T 1: 5.08(Typ.); Fig. 2 |
| Application Circuit | Table 1: Recommended parameters; IC SCM1201; C1 1µF/25V; C2 1µF/25V; D11 40V/1A; D12 40V/1A; R8 10kΩ |
| Fig. | 3 Application circuit of TTF0503/05/09-1T/2T R0 0Ω; Table 2: Recommended parameters; IC SCM1201; C1 1µF/25V; C2 1µF/50V; D11 40V/1A; D12 40V/1A; D21 40V/1A; D22 40V/1A |
| Fig. 5 | Application circuit of TTF1205/12-1T/2T, TTF2405-1T/2T R0 10Ω |
| 1. If it is required to further reduce | input and output ripple, the capacitance of C1 and C2 can be increased properly if required, and should |
| be connected close to the pin | terminal of the module. |
| 2. In order to ensure the converter | can work reliably with high efficiency, the minimum load should not less than 1% rated load when it is |
| used. If the needed power is | indeed small, please parallel a resistor on the output side ( The sum of the efficient power and resistor |
| consumption power is not less | than 1%). |
| Dimensions and | Recommended Layout |
| 1. For additional information | on Product Packaging please refer to www.mornsun-power.com. Roll packaging bag number: 58200091; |
| 2. Unless otherwise specified, | parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH, 100kHz and |
| 3. All index testing methods in | this datasheet are based on our company corporate standards; |
| 4. We can provide other analog | transformer customization service, please contact our technicians directly for specific information; |
| 5. Our products shall be classified | according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified |
| Address: No. 8 Nanyun 4th Road, | Huangpu District, Guangzhou, China |
| Tel: 86-20-38601850 | Fax: 86-20-38601272 E-mail: info@mornsun.cn www.mornsun-power.com |