| Series | LO15-26D1305-03 |
| Model | LO15-26D1305-03 |
| Brand | MORNSUN |
| Input Voltage Range (AC) | 57–528 VAC |
| Input Voltage Range (DC) | 80–745 VDC |
| Input Frequency | 47–63 Hz |
| Input Current | 100VAC: 0.5A max; 115VAC: 25A |
| Inrush Current | 40A @220VAC |
| Recommended External Input | 3.15A, slow fusing, necessary |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | Primary output (Vo1): ±2%; Secondary output (Vo2): ±10%; Primary output (Vo1): ±0.5% (Balance load) |
| Line Regulation | Full load: %; Secondary output (Vo2): ±1.5%; Primary output (Vo1): ±3% |
| Load Regulation | Secondary output (Vo2): ±5%; Primary output (Vo1): 150% (0%-100% load; 1; 20MHz bandwidth) |
| Ripple & Noise | mV; (peak-peak value): 250mV max; Secondary output (Vo2): mV |
| Temperature Coefficient | ±0.02%/℃ (Primary output (Vo1)) |
| Stand-by Power Consumption | 0.5W @220VAC |
| Short Circuit Protection | Hiccup, continuous, self-recovery |
| Over-current Protection | >150% Io, self-recovery; Primary output (Vo1): ≤16VDC |
| Over-voltage Protection | ≤7.5VDC (Secondary output (Vo2)) (Balance load) |
| Minimum Load | 10% |
| Hold-up Time | 50 ms @220VAC input, Io=100% |
| Isolation Input-output | 4000 VAC; Test time: 1min: VAC |
| Voltage Output-output | 3000 |
| Insulation Resistance | 50 MΩ |
| Operating Temperature | -40 to +70℃ |
| Storage Temperature | -40–+85℃ |
| Storage Humidity | 90 %RH |
| Altitude | 2000 m; Wave-soldering: 260 ± 5℃; typ, time: 5 - 10s max |
| Welding Temperature | 360 ± 10℃; typ, time: 3 - 5s max (Manual-welding) |
| Switching Frequency | 65 KHz; -40℃ to 0℃: 1.00 KHz |
| Power Derating | %/℃; +50℃ to +70℃: 2.00 %/℃ |
| Safety Class | CLASS I I |
| MTBF | > 300,000 h (MIL-HDBK-217F@25℃) |
| ESD | Perf. Criteria B (IEC/EN61000-4-2 Contact ±6KV/Air ±8KV) |
| RS | perf. Criteria A (IEC/EN61000-4-3 10V/m) |
| EFT | IEC/EN61000-4-4 ±4KV: perf. Criteria B; IEC/EN61000-4-5 Line to line ±2KV: perf. Criteria B |
| EMS | for recommended circuit) perf. Criteria B (IEC/EN61000-4-5 Line to line ±4KV (See Fig. 2 or Fig. 3) |
| CS | perf. Criteria A (IEC/EN61000-4-6 10Vr.m.s) |
| interruptions and voltage | perf. Criteria B (IEC/EN61000-4-11 0%,70%) |
| Percent(%) Tem per | Inpu t Vol ta ge Der ating Cur ve (ature Dera ti ng C ur ve) (Percent(%)) |
| Power 70 | Ambi ent temp er atur e: 25℃ (Power) |
| Output 40 | 1 00–528 VAC (57) (Output 40) |
| -4 0 0 | 1 20–745 VDC (50 70 80) |
| A mbi | Inpu t Vol ta ge (ent Tem.( ℃ )) |