| Serie | TExxxxN |
| Modelo | TExxxxN |
| Marca | MORNSUN |
| Tensión de entrada | Typ.-5%–Typ.+5% V; Non-isolation power output: 1.0W |
| Power Input Input Power | Isolation power output: 1.5W; Input reverse polarity protection (Models with 5V |
| Power Supply Protection | power input do NOT provide this function) |
| Input Signal | See selection guide mV; In case of max. input of current signal: 250mV |
| Signal Input | 10 MΩ (In case of max. input of voltage signal) |
| Maximum Continuous | 50mA (In case of input of current signal) |
| Over Range | 30V (In case of input of voltage signal) |
| Isolation Power Output Voltage | Typ.-10%–Typ.+10% V (Isolation power output at full load) |
| Output Output Current | 25mA max |
| Output Signal | See selection guide |
| Signal Output Load Capacity | 2 kΩ |
| Rizado y ruido | 30 mVpp max (20MHz Bandwidth) |
| Item | Min.–Max. Unit (Operating Conditions) |
| Zero Offset | -0.1%FS–+0.1%FS |
| Signal Precision | -0.1%FS–+0.1%FS (Operating temperature from -40℃ to) |
| Coeficiente de temperatura | 50% PPM/℃; +85℃: PPM/℃; Full Degree Regulation: -5%FS–+5%FS PPM/℃ |
| Adjustable Function | -5%FS–+5%FS (Zero Regulation) |
| Bandwidth | 2kHz |
| Response Time | 1 ms |
| Electric Isolation | Isolated between the signal input and; output. (Electric strength test for 1 minute with a) |
| Isolation Test | 2 kVAC; leakage current <1mA, humidity <70%RH: kVAC |
| Resistencia de aislamiento | At 500VDC: 100 MΩ |
| Temperatura de funcionamiento | -40 to +85℃ |
| Transportation and Storage Temperature | -50 to +105℃ |
| Safety Standard | (Report) typ; EN62368-1 min |
| Clase de seguridad | CLASS III shock; The presence of dust, severe vibration, shock |
| Application Environment | and corrosive gas may cause damage to the; product |
| Material de la carcasa | Black plastic, flame-retardant heat- resistant |
| Package | DIP18 |
| Peso | 5.5g(typ.) |
| Método de refrigeración | Free air convection |
| Emisiones EMC | CE: CISPR32/EN55032 CLASS A (see Fig. 6 for recommended circuit) |
| Inmunidad EMC | ESD TE6S6SN-3.3-9: IEC/EN61000-4-2 Contact ±4kV (perf. Criteria B); EFT: IEC/EN61000-4-4 Power supply port ±2kV (see Fig. 6 for recommended (circuit) perf. Criteria B); Surge: IEC/EN61000-4-5 Power supply port ±1kV (see Fig. 6 for recommended (circuit) perf. Criteria B) |