| Serie | LIMF240-23BxxG |
| Modelo | LIMF240-23B24G |
| Marca | MORNSUN |
| Input Voltage Range (Rated) | 100–240 VAC |
| Rango de tensión de entrada (CA) | 85–277 |
| Rango de tensión de entrada (CC) | 120–390 VDC |
| Maximum Input Voltage | 305 VAC (Lasts for 2h without damage) |
| Input Voltage Frequency | 47–63 Hz; 115VAC: 3 Hz |
| Corriente de entrada | 230VAC: 1.5A max; 115VAC: 14A |
| Corriente de irrupción | 230VAC: 26A; 115VAC: 0.25A (Cold start) |
| Inrush Current Integral (I²t) | A²s; 230VAC: 0.867 A²s; 115VAC: 0.98 A²s |
| Factor de potencia | 0.96 @230VAC (Rated load) |
| THD | 3% @230VAC, rated load |
| Start-up Delay Time | 520 ms; 115VAC/230VAC, rated load: ms |
| Rise Time | 19 |
| Input Fuse | 8A (Built-in fuse) |
| DC OK Signal | 30VDC/1A typ, Max. max (Resistive load) |
| Conexión en caliente | Unavailable |
| Precisión de la tensión de salida | ±1.0% (Full load range) |
| Regulación de línea | ±0.25% (Rated load) |
| Regulación de carga | ±0.5%; 12V: 11.5% (0% - 100% load) |
| Power Consumption | 230VAC, rated load: W; 24V: 10.8W; 12V: 150W (20MHz bandwidth) |
| Rizado y ruido | mV; 24V: 100mV max ((peak-to-peak value)) |
| Tiempo de retención | 37 ms |
| Protección contra sobrecorriente | 150% typ, 110% min; 115VAC/230VAC: Hiccup mode, constant current works 1s (Typ.), |
| Protección contra cortocircuitos | turn off 10s, continuous, self-recovery; 12V: ≤18VDC (Hiccup, self-recovery) |
| Protección contra sobretensión | 24V: ≤35VDC (Hiccup, self-recovery); 230VAC, Over-temperature protection start: 105 %Vo |
| Protección contra sobretemperatura | ℃; rated load: 60℃; Over-temperature protection release: ℃ |
| Isolation (Input–⏚) | 2500 VAC |
| Aislamiento (entrada–salida) | 4000 VAC (Electric strength test for 1min., leakage current) |
| Aislamiento | VAC (<5mA ( Isolation Test need to remove the screw at the mark) |
| Resistencia de aislamiento | Input - output Relative humidity: < 95%, non-condensing: 500 MΩ; Test voltage: 500VDC: MΩ; Output -: 500 MΩ |
| Temperatura de funcionamiento | -40 to +85℃ |
| Temperatura de almacenamiento | -40–+85℃ |
| Humedad de funcionamiento | 5–95 %RH; Non-condensing: %RH |
| Humedad de almacenamiento | 5–90 %RH; PFC: 40–130 %RH |
| Frecuencia de conmutación | DC-DC: 50–130 kHz; Auxiliary source: 65; -40℃ to -25℃: 3.34; +60℃ to +70℃: 3.75 %/℃ (Operating temperature) |
| Power Derating | derating: %/VAC; +70℃ to +85℃: 3.17 %/VAC; Input voltage derating 85VAC - 100VAC: 1 %/VAC; Input - output: <0.5mA %/VAC |
| Corriente de fuga | Input -: <0.88mA max; Design refer to IEC/UL/EN/BS EN62368-1, (240VAC) |
| Safety Standard | UL61010-1; –IEC60079-7; IEC60079-15; –71.04-2013 |
| Clase de seguridad | CLASS I; MIL-HDBK-217F@25℃: 980,000 h |
| MTBF | 878,000 h (MIL-HDBK-217F@40℃) |
| Pollution degree | 2 |
| Warranty | 5 years (Ambient temperature: <40℃) |
| High and Low Voltage Crossing | NB/T 31111-2017 (Test with Mornsun P/N: LUPS20-24F-N) |
| Material de la carcasa | Metal (AL5052, SUS304) |
| Dimensiones | 124.00mm × 121.00mm × 48.00mm |
| Peso | 870g (Typ.) |
| Método de refrigeración | Free air convection |
| Emisiones EMC | CE (Input port): CISPR32 EN55032 150K - 30MHz (CLASS B); CE (Output port): CISPR32 EN55032 150K - 30MHz (CLASS A); RE: CISPR32 EN55032 30MHz - 1GHz (CLASS B) |
| Inmunidad EMC | Harmonic current: IEC/EN61000-3-2 (CLASS A and CLASS D); Voltage flicker: EN61000-3-3; ESD: IEC/EN61000-4-2 Contact1±8KV/Air ±15KV; RS: IEC/EN61000-4-3 20V/m; EFT (Input port): IEC/EN61000-4-4 ±4KV; EFT (Output port): IEC/EN61000-4-4 ±2kv; Surge (Input port): IEC/EN61000-4-5 L to N ±3KV/L or N to PE ±6KV; Surge (Output: port) IEC/EN61000-4-5 line to line ±1KV/line to ground ±2KV (perf. Criteria A); Harmonic and: network signal IEC61000-4-13 CLASS 3; CS: IEC/EN61000-4-6 0.15 - 80MHz 20Vr.m.s; Voltage dips: IEC/EN61000-4-11; Voltage interruption: IEC/EN61000-4-11 0% of 200Vac, 0Vac, 250/300 cycle (perf. Criteria C) |