| السلسلة | LM450-12Dxx |
| الطراز | LM450-12D3209-50 |
| العلامة التجارية | MORNSUN |
| Input Voltage Range (Rated) | 200–240 VAC |
| نطاق جهد الدخل (تيار متردد) | 176–285 |
| نطاق جهد الدخل (تيار مستمر) | 240–400 VDC |
| Input Voltage Frequency | Hz; 47–63 Hz; Rated input (Certified voltage): 6 Hz |
| تيار الدخل | 6A max @230VAC |
| Inrush Current (Cold Start) | 230VAC: 30A typ, 35A max |
| Start-up Delay Time | 1.5 s @230VAC, rated load |
| Input Fuse | Built-in fuse: 12.5A; Under-voltage protection start(Input voltage drops: A; 145–165 A; from high to low), each output with 50% Io: A |
| Input Under-voltage Protection | Under-voltage protection release(Input voltage rises: VAC; 160–175 VAC; from low to high), each output with 50% Io: VAC; Under-voltage protection start (Input voltage rises: VAC; 286–305 VAC; from low to high), each output with 50% Io: VAC |
| Input Over-voltage Protection | 275–295 %Vo (Under-voltage protection release (Input voltage; drops from high to low), each output with 50% Io) |
| التوصيل أثناء التشغيل | Unavailable |
| دقة جهد الخرج | 28V/32V/48V: ±1 typ, ±2 max; 9V: ±2 typ, ±3 max; 28V/32V/48V: ±1% (Full load range) |
| تنظيم الخط | Rated load: %; 9V: ±2%; 28V/32V/48V: ±1.5% |
| تنظيم الحمل | ±2% (9V) (0% - 100% load) |
| Minimum Load | 0; 28V: 200; 32V 200-285VAC: 230 (20MHz bandwidth) |
| التموج والضوضاء | mV; (peak-peak value) 48V: 250mV max; 9V: 150mV max |
| معامل درجة الحرارة | ±0.02%/℃ |
| زمن الاحتفاظ | 15 ms @230VAC, rated load |
| حماية من قصر الدائرة | Recovery time <3s after the short circuit disappear.: Hiccup or turn-off, continuous, self-recover; <200VAC: ≥110% Io, hiccup, self-recover |
| حماية من زيادة التيار | ≥200VAC: ≥130% Io, hiccup, self-recover; 28V: ≤40VDC (Hiccup, self-recover) |
| حماية من زيادة الجهد | 32V: ≤50VDC (Hiccup, self-recover) over-temperature; 48V: ≤60VDC (Hiccup, self-recover) over-temperature; hiccup, self-recover after over-temperature |
| حماية من ارتفاع درجة الحرارة | fault elimination |
| Isolation (Input–⏚) | 1500 VAC |
| العزل | VAC (Electric strength test for 1min., leakage current <5mA) |
| العزل (الدخل–الخرج) | 3000 VAC (* Input - output (Before testing the isolation and insulation resistance,) |
| Isolation (Output–⏚) | 500 VAC (remove the φ4 screw ①)) |
| مقاومة العزل | Input - output Relative humidity: < 95%RH, no condensation: 100 MΩ; Test voltage: 500VDC: MΩ; Output -: 100 MΩ |
| درجة حرارة التشغيل | -40 to +85℃ |
| درجة حرارة التخزين | -45–+85℃ |
| رطوبة التشغيل | 95 %RH; Non-condensing: %RH |
| رطوبة التخزين | 95 %RH; -40℃ to -25℃: 2.67 %RH (Operating temperature) |
| Power Derating | derating (Without +55℃ to +70℃: 3.33 %/℃; aluminum plate): %/℃; +70℃ to +85℃: 1.33 %/℃; Input -: ≤3.5mA %/℃ |
| تيار التسرب | ≤0.25mA max (Input - output) (240VAC, 60Hz) |
| معايير السلامة | Design refer to EN62368-1, GB4943.1 |
| فئة السلامة | CLASS I |
| MTBF | ≥300,000 h (MIL-HDBK-217F@25℃) |
| Warranty | 3 years (Ambient temperature: <85℃) |