| Series | DOP-110CS |
| Model | DOP-110CS |
| Type | HMI & Touch Panels |
| Brand | DELTA |
| (3) (Description of each part) | (5) Installation and wiring adjacent objects or walls. |
| High color‧Wide screen‧User-friendly () | This product should be used on a case / platform which conforms to enclosure Type 4X standard DOP-110CS (for indoor use only). |
| Delta Electronics, Inc. () | The maximum panel thickness for mounting must be no greater than 5 mm. No.18, Xinglong Rd., Taoyuan City |
| Instruction Sheet | Step 1: Put the waterproof gasket into the HMI and then Step 2: Place the fasteners into the slots and tighten |
| (1) | General precautions Thank you for purchasing this product. This instruction sheet provides information about the DOP-100 series HMI. Before using this product, please read through this instruction sheet carefully to ensure the correct use of the product. Please keep this sheet handy for quick reference whenever needed. Before finishing reading this sheet, please follow the instructions below: |
| A | Operation / display area liquids. electrical standard (please refer to NFPA 70: National Electrical Code, 2005 Ed.). |
| batteries by yourself. | For heat dissipation, please keep a minimum the equipment may be impaired. Taoyuan City, Taiwan. TEL: +886-3-3626301. If you have any inquiry during operation, please contact our local distributors or Delta sales representatives. The content of this instruction sheet may be revised without prior notice. Please consult our distributors or download the latest version at Delta’s website (http://www.delta.com.tw/ia). |
| (2) | Communication port pin assignment DOP-110CS COM1 Power input terminal |
| A (B) | COM2 / COM3 |
| MODE1 | (24AWG wire min.) |
| 3 (TXD) | Solid 24 – 12 7 – 8 mm 5 kg-cm (4.3 lb-in) |
| 4 (-) | Stranded 24 – 12 7 – 8 mm 5 kg-cm (4.3 lb-in) |
| 5 (GND) | (4) Mounting dimensions |
| 7 (RTS) | DOP-110CS |
| 9 (-) | rating of the cable must be greater than 75oC (167oF). DOP-110CS COM2 |
| MODE1 (MODE2) | MODE3 |
| COM Port (Pin) | COM2 COM3 COM2 COM3 COM2 COM3 |
| Model | DOP-110CS |
| Panel type | 10.1" TFT LCD (65535 colors) |
| Resolution | 1024 x 600 pixels LED Back Light |
| Display | Backlight (half-life under room temperature 25oC > 20,000 hours)*1 Display 226 mm x 128.7 mm range |
| Brightness | 300 cd / m² (Typ.) |
| CPU | ARM Cortex-A8 (800 MHz) |
| Flash ROM | 256 Mbytes |
| RAM | 256 Mbytes |
| Touchscreen | 4-wire resistive touchscreen > 1,000,000 operated |
| Buzzer | Multi-tone Frequency (2K - 4K Hz) / 80dB |
| USB | 1 USB Slave Ver. 2.0; 1 USB Host Ver. 2.0 |
| COM1 | RS-232 (supporting flow control)*2 Serial |
| communication (COM2) | RS-232 (supporting flow control) / RS485*2 port |
| COM3 | RS-422 / RS-485*2 |
| Cooling method | Natural cooling CE (please use shielding network cable and magnetic ring with the Approvals filter of 300 ohm / 100 MHz) |
| Panel waterproof level | IP65 / NEMA4 DC +24V (-15% to +15%) (please use an isolated power supply) Operation voltage*2 Supplied by Class 2 or SELV circuit (isolated from MAINS by double insulation) |
| Leakage current | 500 VAC for 1 minute (between DC24V terminal and FG terminal) *2 |
| Power consumption | 10.4 W (Max) *3 |
| Backup battery | 3V lithium battery CR2032 × 1 About 3 years or more at 25oC Backup battery life (subject to operation temperature and condition) |
| Operation temperature | 0oC to 50oC (32oF to 122oF) |
| Storage temperature | -20oC to +60oC (-4oF to 140oF) 10% to 90% RH [0oC - 40oC], 10% to 55% RH [41oC - 50oC]; Operating environment pollution degree: 2 Conforms to IEC61131-2: continuous vibration 5 Hz - 8.3 Hz with Vibration resistance amplitude 3.5 mm; 8.3 Hz - 150 Hz with amplitude 1G Conforms to IEC60068-2-27: Shock resistance 11 ms, 15 G Peak, in X, Y, Z directions each for 6 times Dimension 272 x 200 x 61 (W) x (H) x (D) mm |
| Weight | Approx. 1330 g Note: 1. The half-life of the backlight is defined as the maximum luminance being reduced by 50% when the maximum drive current is supplied to the HMI. The life of LED backlight shown here is estimated at the room temperature of 25oC with ambient humidity. 2. The withstand voltage of the isolated power circuit is 1500V peak for 1 minute. 3. The HMI power consumption is the power consumed when the HMI is not connecting with other |
| (3) Parça Açıklamaları | (5) Montaj ve Kablolama boşluk olduğundan emin olun. DOP-110CS |