| Série | WRF_S-3WR2 |
| Modelo | WRE2405S-3WR2 |
| Tipo | Conversores DC/DC |
| Marca | MORNSUN |
| Input Current (full load/no-load) | 5VDC Input: 800/60 typ, 846/65 max mA; 3.3V Output: 277/25 typ, 286/30 max mA; 12VDC Input: mA; Others: 314/25 typ, 338/30 max mA; 3.3V Output: 140/8 typ, 145/13 max mA; 24VDC Input: mA; Others: 154/8 typ, 163/13 max mA; 3.3V Output: 69/3 typ, 72/10 max mA; 48VDC Input: mA; Others: 78/3 typ, 85/10 max mA; 5VDC Input: 20mA; 12VDC Input: 20mA |
| Corrente de ondulação refletida | 24VDC Input: 55; 48VDC Input: 55; 5VDC Input: -0.7–12; 12VDC Input: -0.7–25 |
| Tensão de surto (máx. 1 s) | 24VDC Input: -0.7–50 VDC; 48VDC Input: -0.7–100 VDC; 5VDC Input: 3.5–4.5 VDC; 12VDC Input: 4.5–9 VDC |
| Starting Voltage | 24VDC Input: 11–18; 48VDC Input: 24–36 |
| Filtro de entrada | Filter capacitor |
| Conexão a quente | Unavailable resistance; Module turn-on: The Ctrl end is suspended or of high resistance |
| Ctrl | Connect with high level (relative to the input; Module turn-off: grounding) to make the 5-10mA current flows into; the Ctrl end. |
| Output Voltage Accuracy ① | ±1 typ, ±3 max (5%-100% load) |
| Line Regulation ② | ±0.2% typ, ±0.5% max (Full load, the input voltage is from low to high) |
| Regulação de carga | ±0.4 typ, ±0.75 max (5%-100% load) |
| Transient Recovery Time | 0.5 ms typ, 3 ms max; 25% load step change: ms |
| Transient Response Deviation | ±2.5% typ, ±5% max |
| Coeficiente de temperatura | ±0.02 %/℃ typ, ±0.03 %/℃ max (Full load) |
| Insulation Voltage | Input-output, with the test time of 1 minute and: VDC; 3000 VDC; the leak current lower than 1mA: VDC |
| Resistência de isolamento | Input-output, isolation voltage 500VDC: 1000 MΩ |
| Capacitância de isolamento | 30 pF typ, 50 pF max (Input-output, 100kHz/0.1V) |
| Temperatura de operação | -40–+85℃ (see Fig. 1) |
| Temperatura de armazenamento | -55–+125℃ |
| Elevação da temperatura do invólucro | +25 ℃ (Ta=25℃, nominal input, full load output) |