| Serie | LOF350-20Bxx |
| Modelo | LOF350-20B24 |
| Marca | MORNSUN |
| Rango de tensión de entrada (CA) | 90–264 VAC |
| Rango de tensión de entrada (CC) | 127–370 VDC |
| Input Voltage Frequency | 47–63 Hz; 115VAC: 4 Hz |
| Corriente de entrada | 230VAC: 2A max; 115VAC: 50A |
| Corriente de irrupción | 230VAC: 75A; 115VAC: 0.98A (Cold start) |
| Factor de potencia | 0.95 @230VAC (Full load) |
| Corriente de fuga | <0.1mA; Single fault <0.5mA @240VAC |
| Conexión en caliente | Unavailable |
| Precisión de la tensión de salida | 12V/15V/18V/19V: ±3.0%; %; 24V/27V/36V/48V/54V: ±2.0% (Full load range) |
| Regulación de línea | ±0.5% (Rated load) |
| Regulación de carga | ±1.0%; 12V/15V/18V/19V: 120%; 24V: 150% (0% - 100% load; 20MHz bandwidth) |
| Output Ripple & Noise | mV; 27V/36V: 200mV max; 48V/54V: 250mV max ((peak-to-peak value)) |
| Coeficiente de temperatura | ±0.03%/℃ |
| Minimum Load | 0.0%; Air cooling: 14.0% typ, 12.0% min |
| Tiempo de retención | 230VAC, full load: ms; 20.5CFM: 8.0 ms typ, 6.0 ms min |
| Stand-by Power Consumption | 1.0W @230VAC |
| Protección contra cortocircuitos | Constant current, continuous, self-recover (recover time <5s after the short circuit disappear) |
| Protección contra sobrecorriente | ≥110%, typ, self-recover max; 12V: ≤15.0V; 15V: ≤18.5V; 18V: ≤ 23.7 V; 19V: ≤ 23.7 V; Output voltage turn off, |
| Protección contra sobretensión | 24V: ≤30.0V recover; re-power on for recover; 27V: ≤33.5V recover; 36V: ≤45.0V recover; 48V: ≤59.5V recover; 54V: ≤63.0V recover; Output voltage turn off, re-power on for |
| Protección contra sobretemperatura | recover after the temperature drops.; Offer output power of 12V/0.5A with; voltage accuracy ±15%; Offer output power of 12V/0.5A with (12V/15V/24V/36V/48V/54V) |
| Fan power | 18V/19V: output; voltage accuracy -15% - +25% output; Offer output power of 12V/0.5A with; 27V: output; voltage accuracy -25% - +15% output |
| 2.* The “Tip and barrel method” is | and 0.1uF ceramic capacitor, please refer to (used for ripple and noise test, output parallel 10uF electrolytic capacitor) |
| Isolation (Input–⏚) | 2000 |
| Input- output | 4000 VAC |
| Test | Output -: 1500; Input - Environment temperature: 25±5℃,: 100 (<10mA) |
| Insulation Resistance Isolation | Input - output Relative humidity: <95%RH, non-condensing: 100 MΩ; Testing voltage: 500VDC: MΩ; Output -: 100 MΩ; Input - output: 2 × MOPP MΩ; Input -: 1 × MOPP MΩ |
| level | 1 × MOPP (Output -) |
| Temperatura de funcionamiento | -40 to +70℃ |
| Temperatura de almacenamiento | -40–+85℃ |
| Humedad de almacenamiento | 10–95 %RH; Non-condensing: %RH |
| Humedad de funcionamiento | 20–90%/℃; Operating temperature +50℃ to +70℃: 2.5 %/℃; derating -40℃ to +50℃: 0 %/℃ |
| Power Derating | 90VAC - 100VAC: 1.00; Input voltage derating: %/VAC; 100VAC - 264VAC: 0; Design refer to IEC/UL62368-1, ES60601-1, GB4943.1 |
| Safety Standard | & EN60335-1; –EN61558-1; BS–IEC60601-1 EN62368-1; CLASS I (with PE and must be connected)/ EN62368-1 |
| Clase de seguridad | CLASS II (without PE) |
| MTBF | ≥300,000 h (MIL-HDBK-217F@25℃) |
| Material de la carcasa | Open frame |
| Dimensiones | 127.0mm × 76.2mm × 25.4 mm |
| Peso | 295g (Typ.) |
| Cooling Method * | Air cooling (180W/200W) / 20.5CFM (300W/325W/350W) |
| Notes: *Please refer to the product | characteristic curve for cooling method and power derating; |