| Series | LIMF240-23Bxx-EX |
| Model | LIMF240-23B24-EX |
| Type | DIN-Rail Power Supplies |
| Brand | MORNSUN |
| Input Voltage Range (Rated) | 100–240 VAC |
| Input Voltage Range (AC) | 85–277 |
| Input Voltage Range (DC) | 120–390 VDC |
| Maximum Input Voltage | 305 VAC (Lasts for 2h without damage) |
| Input Voltage Frequency | 47–63 Hz |
| Input Switching Voltage | 80 VAC |
| Input Turn-off Voltage | 60; 115VAC: 3 |
| Input Current | 230VAC: 1.5A max; 115VAC: 14A |
| Inrush Current | 230VAC: 26A; 115VAC: 0.25A (Cold start) |
| Inrush Current Integral (I²t) | A²s; 230VAC: 0.867 A²s; 115VAC: A²s; 0.99 A²s |
| Power Factor | 0.98 (12V) (Rated load 24V/48V; 230VAC) |
| THD | 3% @230VAC, rated load |
| Start-up Delay Time | 520 ms; 115VAC/230VAC, rated load: ms |
| Rise Time | 19 |
| Input Fuse | 8A (Built-in fuse) |
| DC OK Signal | 30VDC/1A typ, Max. max (Resistive load) |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | ±1.0% (Full load range) |
| Line Regulation | ±0.25% (Rated load) |
| Load Regulation | ±0.5%; 12V: 11.5% (0% - 100% load) |
| Power Consumption | 230VAC, rated load: W; 24V/48V: 10.8W; 12V/48V: 150W (20MHz bandwidth) |
| Ripple & Noise | mV; 24V: 100mV max ((peak-to-peak value)) |
| Hold-up Time | 37 ms |
| Over-current Protection | 150% typ, 110% min; 115VAC/230VAC: Hiccup mode, constant current works 1s (Typ.), |
| Short Circuit Protection | turn off 10s, continuous, self-recovery; 12V: ≤18VDC (Hiccup, self-recovery) |
| Over-voltage Protection | 24V: ≤35VDC (Hiccup, self-recovery); 48V: ≤60VDC (Hiccup, self-recovery); 230VAC, Over-temperature protection start: 105 %Vo |
| Over-temperature Protection | ℃; rated load Over-temperature protection release: 60℃ |
| Isolation (Input–⏚) | 2500 VAC |
| Isolation (Input–Output) | 4000 VAC (Electric strength test for 1min., leakage current) |
| Isolation | VAC (<5mA ( Isolation Test need to remove the screw at the mark) |
| Test | Output -: 500; DC OK - output: 500; Input -: 500 (shall *)) |
| Insulation Resistance | Input - output At 500VDC: 500 MΩ; Output -: 500 MΩ |
| Operating Temperature | -40 to +85℃ |
| Storage Temperature | -40–+85℃ |
| Operating Humidity | 5–95 %RH; Non-condensing: %RH |
| Storage Humidity | 5–90 %RH; PFC: 40–130 %RH |
| Switching Frequency | DC-DC: 50–130 kHz; Auxiliary source: 65; -40℃ to -25℃: 3.34; +60℃ to +70℃: 3.75 %/℃ (Operating temperature; derating) |
| Power Derating | +70℃ to +85℃: 3.17; Input voltage derating 85VAC - 100VAC: 1 %/VAC; 48V 53VDC-56VDC: 6.67 %/VDC; Input - output: <0.5mA (Output voltage; derating) |
| Leakage Current | 240VAC: BS; Input -: <0.88mA max BS; GB/T3836, safety approved & EN62368-1, BS; EN62368-1(Report) BS; Design refer to IEC60079-0, IEC60079-7, BS |
| Safety Standard | UL61010-1; EN60079-0; typ; IEC60079-15; min EN60079-7; EN60079-15; –UL508; ANSI/ISA; 71.04-2013 |
| Safety Class | CLASS I; MIL-HDBK-217F@25℃: 980,000 h |
| MTBF | 878,000 h (MIL-HDBK-217F@40℃) |
| Pollution degree | 2 |
| Warranty | 5 years (Ambient temperature: <40℃) |
| High and Low Voltage Crossing | NB/T 31111-2017 (Test with Mornsun P/N: LUPS20-24F-N) |
| Case Material | Metal (AL5052, SUS304) |
| Dimensions | 124.00mm × 121.00mm × 48.00mm |
| Weight | 870g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | CE (Input port): CISPR32 EN55032 150K - 30MHz (CLASS B); CE (Output port): CISPR32 EN55032 150K - 30MHz (CLASS A); RE: CISPR32 EN55032 30MHz - 2GHz (CLASS B) |
| EMC Immunity | Harmonic current: IEC/EN61000-3-2 (CLASS A and CLASS D); Voltage flicker: EN61000-3-3; ESD: IEC/EN61000-4-2 Contact1±8KV/Air ±15KV; RS: IEC/EN61000-4-3 20V/m; EFT (Input port): IEC/EN61000-4-4 ±4KV; EFT (Output port): IEC/EN61000-4-4 ±2kv; Surge (Input port): IEC/EN61000-4-5 L to N ±3KV/L or N to PE ±6KV; Surge (Output: port) IEC/EN61000-4-5 line to line ±1KV/line to ground ±2KV (perf. Criteria A); Harmonic and: network signal IEC61000-4-13 CLASS 3; CS: IEC/EN61000-4-6 0.15 - 80MHz 20Vr.m.s; Voltage dips: IEC/EN61000-4-11; Voltage interruption: IEC/EN61000-4-11 0% of 200Vac, 0Vac, 5000ms (perf. Criteria C) |