| Series | LIHF480-23Bxx |
| Model | LIHF480-23B24 |
| Type | DIN-Rail Power Supplies |
| Brand | MORNSUN |
| Input Voltage Range (Rated) | 100–240 VAC |
| Input Voltage Range (AC) | 85–277 |
| Input Voltage Range (DC) | 120–390 VDC |
| Maximum Input Voltage | 305 VAC (Lasts for 2h without damage) |
| Input Voltage Frequency | 47–63 Hz |
| Input Switching Voltage | 65–80 VAC |
| Input Turn-off Voltage | 55–70; 115VAC: 6 |
| Input Current | 230VAC: 3A max; 115VAC: 10A |
| Inrush Current | 230VAC: 15A; 115VAC: 0.98A (Cold start) |
| Power Factor | 0.95 @230VAC |
| THD | 3.5% @115VAC, rated load |
| Start-up Delay Time | 2000 ms @115VAC/230VAC, rated load |
| Input Fuse | 10A (Built-in fuse) |
| Hot Plug | Unavailable |
| Output Voltage Accuracy | ±1.0% (Full load range) |
| Line Regulation | ±0.25% (Rated load) |
| Load Regulation | ±0.5%; 24V: 27.8% (0% - 100% load) |
| Power Consumption | 230VAC, rated load: W; 48V: 25.2W; 24V: 80W (20MHz bandwidth) |
| Ripple & Noise | mV; 48V: 180mV max (peak-to-peak value) |
| Hold-up Time | 22 ms @115VAC/230VAC |
| DC OK Signal | Resistive load: 30VDC/1A typ, Max. max; Hiccup mode, constant current; operation(constant current time adapts with |
| Short Circuit Protection | different load conditions), output off for 5s,; long-term short-circuit protection, self-recover; 125%Io (typ.), work for a long time at room |
| Static power | temperature adapts; 150% Io working 5s (min.), the off time adapts |
| Dynamic power | 115VAC/230VAC: with different load conditions, long-term; protection, self-recover long-term |
| Transient Peak Current | 600% Io working 15ms 3 times (typ.), long-term |
| Function | short-circuit protection, self-recover self-recover); 24V: ≤35VDC (Output-off or clamping, self-recover) |
| Over-voltage Protection | 48V: ≤60VDC (Output-off or clamping, self-recover); 230VAC, Over-temperature protection start: 100 self-recover) |
| Over-temperature Protection | rated load,: ℃; self-recover Over-temperature protection release: 60℃ |
| Isolation (Input–⏚) | 2500 VAC |
| Isolation | VAC (Electric strength test for 1min., leakage current <5mA) |
| Isolation (Input–Output) | 4000 VAC (( Isolation Test for need to remove the screw at the mark) |
| Test | 500 (Output - shall *)) (Input -; Environment temperature: 25±5℃) |
| Insulation Resistance | Input - output Relative humidity: < 95%, non-condensing: 500 MΩ; Test voltage: 500VDC: MΩ; Output -: MΩ |
| Operating Temperature | -40 to +85℃ |
| Storage Temperature | -40–+85℃ |
| Operating Humidity | 10–95 %RH; Non-condensing: %RH |
| Storage Humidity | 20–90 %RH; PFC: 60–70 %RH |
| Switching Frequency | kHz; DC-DC: 40–130; -40℃ to -30℃: 2; +60℃ to +75℃: 2.5; +75℃ to +85℃ 25CFM: 2.25 %/℃; -40℃ to -30℃: 2 (Operating temperature; derating @AC input) |
| Power Derating | +60℃ to +75℃: 2.5; +75℃ to +85℃ 25CFM: 2.25; 85VAC - 100VAC: 1 %/VAC; 120VDC - 140VDC: 1 %/VDC (Operating temperature; derating @DC input; Input voltage derating) |
| Leakage Current | 240VAC Touch current: <0.5mA max; EN62368-1, BS EN62368-1(Report); Design refer to IEC/UL62368-1, |
| Safety Standard | UL/IEC/EN61010-1; –GB4943.1; EN61558-1; EN62477-1; –IEC60079-7; GB3836.1; –ANSI/ISA 71.04-2013 IEC60079-15 |
| Safety Class | CLASS I; MIL-HDBK-217F@25℃: >702,000h |
| MTBF | >524,000h (MIL-HDBK-217F@40℃) |
| OVC | III |
| Warranty | 5 years (Ambient temperature: <40℃) |
| High and Low Voltage Crossing | NB/T 31111-2017 (Test with Mornsun P/N: LUPS20-24F-N-UNT) |
| Case Material | Metal (AL5052, SUS304) |
| Dimensions | 125.00mm × 130.00mm × 70.00mm |
| Weight | 1320g (Typ.) |
| Cooling Method | Free air convection |
| EMC Emissions | ; RE Industry/Light: industry |
| EMC Immunity | ; ; RS Power: station/Subsation IEC61000-6-5 80M - 1GHz, 10V/m; 1G - 2.7GHz, 3V/m; 2.7G -; EFT Power: station/Subsation; ; CS: 10kHz, apply power≤2W (The applied voltage can be; Voltage: IEC61000-6-1 0%, 0.5/1 period, 70%, 25/30 period @50/60Hz, |